GA 68-72 shortbed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GAc10boy** · 01-29-2017, 10:00 PM

I have a 68-72 shortbed for sale. The bedsides, header panel are in good honest condition. The passenger side has a bump near the taillight and marker light. The bed floor and lower wheel wells are shot. (Tailgate for sale in another post / truck not for sale).

SOLD

67ChevyRedneck · 01-30-2017, 12:25 AM

Interested...

It there ANY rust through around the wheel wells or inside of the wheel well lip, and I mean, like at all? I already have a set like that...

In addition to the obvious damage, it could be lighting or the primer, but are the areas I circled dented as well?

I also have no interest in the floor or header panel, I only want the bedsides. From what I'm seeing, would you consider $350 -400 for both bedsides (I'll want to look at them in person better) and I can help remove the bolts to take the bed apart (I can bring a grinder if you have electricity close by, I took my old bed apart in about $45 minutes by myself with a grinder.). I would come this Friday or Saturday depending on schedule. I also don't mess around, if I say I'm coming, I will be there.

**GAc10boy** · 01-30-2017, 12:53 AM

Quote:

Originally Posted by 67ChevyRedneck

Interested...

It there ANY rust through around the wheel wells or inside of the wheel well lip, and I mean, like at all? I already have a set like that...

In addition to the obvious damage, it could be lighting or the primer, but are the areas I circled dented as well?

I also have no interest in the floor or header panel, I only want the bedsides. From what I'm seeing, would you consider $350 -400 for both bedsides (I'll want to look at them in person better) and I can help remove the bolts to take the bed apart (I can bring a grinder if you have electricity close by, I took my old bed apart in about $45 minutes by myself with a grinder.). I would come this Friday or Saturday depending on schedule. I also don't mess around, if I say I'm coming, I will be there.

Thanks for the interest. I'll honestly need to take a closer look when I get back from a business trip on Wednesday. I didn't look at them closely enough to answer your questions. That said, I didn't notice any major rust around the upper edge of the fender well that attaches to the bed. Only at the floor. As for the wheel well lip on the outer bedside, I don't believe there is any rust. All that said, I'd like to take a closer look. Also, I'd rather move the whole bed so if somebody comes along between now and when I can inspect them further and wants the whole deal, I'll have to let it go to them. If that doesn't happen between now and Wednesday when I can get the answers you need, I'll consider $400 for both bedsides.

Happy to inspect them further for you.

67ChevyRedneck · 01-30-2017, 01:06 AM

Sounds fair to me. I have a new header panel and rust free floor, just looking for a better set of bedside from what I have. Hopefully it works out and I'll see ya this weekend!

chuckmc8 · 01-30-2017, 06:46 AM

Next inline on this bed

**GAc10boy** · 01-30-2017, 10:50 AM

Quote:

Originally Posted by 67ChevyRedneck

Sounds fair to me. I have a new header panel and rust free floor, just looking for a better set of bedside from what I have. Hopefully it works out and I'll see ya this weekend!

Thanks, 67ChevyRedneck. I'll take a look on Wednesday.

**GAc10boy** · 01-30-2017, 10:52 AM

Quote:

Originally Posted by chuckmc8

Next inline on this bed

I'll keep you posted, Chuck.

01-29-2017, 10:00 PM	#1
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	68-72 shortbed I have a 68-72 shortbed for sale. The bedsides, header panel are in good honest condition. The passenger side has a bump near the taillight and marker light. The bed floor and lower wheel wells are shot. (Tailgate for sale in another post / truck not for sale). SOLD __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build Last edited by GAc10boy; 02-06-2017 at 03:43 PM.

01-30-2017, 12:25 AM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 68-72 shortbed Interested... It there ANY rust through around the wheel wells or inside of the wheel well lip, and I mean, like at all? I already have a set like that... In addition to the obvious damage, it could be lighting or the primer, but are the areas I circled dented as well? I also have no interest in the floor or header panel, I only want the bedsides. From what I'm seeing, would you consider $350 -400 for both bedsides (I'll want to look at them in person better) and I can help remove the bolts to take the bed apart (I can bring a grinder if you have electricity close by, I took my old bed apart in about $45 minutes by myself with a grinder.). I would come this Friday or Saturday depending on schedule. I also don't mess around, if I say I'm coming, I will be there. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-30-2017, 01:06 AM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 68-72 shortbed Sounds fair to me. I have a new header panel and rust free floor, just looking for a better set of bedside from what I have. Hopefully it works out and I'll see ya this weekend! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-30-2017, 06:46 AM	#5
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 68-72 shortbed Next inline on this bed __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.