rally wheels beauty rings HELP?

[Ricks1971]

I have a set of 15' 5 lug rally wheels on my 67 chevy C10 and I looking for a set of aftermarket beauty rings. I am not sure if the correct rings are 2 1/2 or 3 inches wide. Does any of you guys know where to get these that are close to stock gm ones? thanks Rick

[michael bustamante]

i have some good daily driver ones. 3" i think. let me know if you need them.
most of the aftermarkets ive found have tabs that bend easily. ( like from o reillys or autozone )

[Already Gone]

If I was you I'd hunt around for originals instead of getting aftermarket ones. I bought aftermarket ones from EBay a few years ago and they don't look the same as the originals on the truck. If your truck is a driver and not a perfecto show truck, originals with a bump or slight scratch would be hardly noticeable.

[geezer#99]

Do you have the truck style rally's or the corvette style rally's?
The rings are different.

[michael bustamante]

truck rallyes. theres a pic of them in the for sale section. ill ttt it now

[Ricks1971]

they are 5 lug truck rally wheels 15X9 wheels. Here's a pic of the wheel with aftermarket rings.

[Ricks1971]

still trying to find out if these 5 lug rallys tale 3" or 2 1/2" rally rings? any help? thanks Rick

[geezer#99]

Why does it matter?
The wheels aren't original!
I prefer narrower trim rings. Like 1 or 1 1/2 inch.
Make the wheel look deeper.

[michael bustamante]

I think OE is 2"

[leddzepp]

You can put any width trim ring on (2", 2.5", whatever) as long as it is for a 15" wheel. Use whatever looks best to you.

[Ricks1971]

thanks guys I think the 3" cover too much of the 5 lug wheels and work good on the 6 lug wheels. I am going to try the 2 or 2 1/2 ones so you can see more of the wheel itself.

[Keith Seymore]

Originally Posted by Ricks1971

they are 5 lug truck rally wheels 15X9 wheels. Here's a pic of the wheel with aftermarket rings.

They are not 15x9 unless they have been widened. The widest stock rally is 15x8.

K

[jondancer]

Originally Posted by leddzepp

You can put any width trim ring on (2", 2.5", whatever) as long as it is for a 15" wheel. Use whatever looks best to you.

Will a 2.5" or 3" ring fit on a 6.5" van rally ? On my last truck I staggered the trim rings and had narrow ones up front and wide in the rear .

[TwoFiftyShifter]

No. For the 6.5 rallies, you need 1.5 inch rings. I run. 15x8 rallys and 4" rings.

[100%Chevy]

The originals were stainless.
Just be aware that most of the aftermarket stuff is cheap chrome plated steel and doesn't hold up well.
Reason the tabs bend so easy too!
Mike.

[demian5]

I have a stainless set of OG corvette ones Im not going to use again. The wide ones for 8" rims.