Another Ez Air Ride installed and Ready to Roll....

[still1graphics]

Thanks again to Steve over at Ez Air Ride Suspension for the great kit for my C10 trucks! He's a great guy with years of air ride experience.... I plan to build another one soon!!!

[still1graphics]

P.s. I put this kit on in about 4 hours me and my buddy. .. This kit is super easy to install and very reliable! More pics of my new build coming soon! !!

[still1graphics]

Here is a picture of the other truck hooked up with the Ez Air Ride Suspension kit! This is a nice little daily driver that rides soon smooth on air! This is the way to roll...

64' chevy c10 fleetside bagged with the classic ez air ride kit!

[still1graphics]

Just a few pics from the install and sleek gauges!

[still1graphics]

Gauges under the dash...

[66ZZ4]

Still1 Love the 64. Looks killer. What size tire and wheel are you running and how wide are the white walls?

[still1graphics]

I think the tires were 205 / 75 / 15
And the white wall tires were 3" wide.
I sold the truck or else I would check?
Sorry I hope this helps?

[still1graphics]

A few more of my old builds with the sweet Ez Air Ride Suspension from my good buddy Steve!!!!
This truck was a really cool little shop truck that was a blast to drive.....

[still1graphics]

Another c10 step side slammed with the air ride!!!!
Ez Air Ride Suspension all the way....
It just doesn't get any better or easier!

[lolife99]

Any pics of the bag mounts?
Air line routing, etc?
Just trying to see what is different or the same about these kits.

[SCOTI]

Seems like someone is advertising w/o stepping up to the plate.

[still1graphics]

I did put the drop cups in the front a - arms to get it down a little lower! They really make a difference in the ride height if you like it low...

[still1graphics]

I also mounted the tank where the space tire used to go and the compressor inside the frame rail. I like them way back in the rear so you don't even notice or hear it running!

[ColinPierce]

on the first truck how much of a drop did you get? Also what ez air ride kit did you use? and did you c notch the frame at all?

[wolfsden]

Originally Posted by still1graphics

Here is a picture of the other truck hooked up with the Ez Air Ride Suspension kit! This is a nice little daily driver that rides soon smooth on air! This is the way to roll...

64' chevy c10 fleetside bagged with the classic ez air ride kit!

Im looking to install the classic plus from EZ ride, I have a 63 C-10 will mine sit this low front and back or did you do other mods to get it that low?

[bbbc10]

if u want to sit low u will have to notch them frame an cup the lower control arms or section the crossmember etc.....put air ride on a in modded truck will only be few inches of drop

[MikeB]

Originally Posted by still1graphics

P.s. I put this kit on in about 4 hours me and my buddy.

Having owned a 69 C10 and looking at all the parts in the kits, I would have guessed an entire weekend or more. Or were the old springs already removed, air lines already run, etc?

[SCOTI]

Originally Posted by MikeB

Having owned a 69 C10 and looking at all the parts in the kits, I would have guessed an entire weekend or more. Or were the old springs already removed, air lines already run, etc?

After you've done 5-6 drops on the same style truck suspension & you do each truck w/the same kit, the repetitiveness significantly helps chip away the time frame. Maybe not from an 'entire weekend' to about 4hrs hours but it def doesn't hurt knowing the territory.

This kit is no better vs what Travis @ AZ Performance can/does offer & Travis supports this board.

[wolfsden]

Originally Posted by bbbc10

if u want to sit low u will have to notch them frame an cup the lower control arms or section the crossmember etc.....put air ride on a in modded truck will only be few inches of drop

ok so what your saying is to do 2-1/2 drop spindles in front and c notch in back plus the EZ ride air bag kit to get it real low?

[bbbc10]

3" drop spindles plus any of these mods..section crossmember plus cup lower control arms remove inner fenders an trim the fenders....rear 10" deep notch an cut the middle of the bed out to clear an maybe mod the rear tubs.....ur only gonna get a inch or 2 more than the lowest static drop u can buy for ur truck

[wolfsden]

Originally Posted by still1graphics

Here is a picture of the other truck hooked up with the Ez Air Ride Suspension kit! This is a nice little daily driver that rides soon smooth on air! This is the way to roll...

64' chevy c10 fleetside bagged with the classic ez air ride kit!

Does the Chevy in this pic have any other lowering devices installed other then the EZ air ride?