Post your Off year steering wheel pics? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FirstOwner69** · 01-01-2015, 11:11 PM

Here's one similar to a couple of 88-94 truck and van wheels already posted. However, this one is leather wrapped and, as far as I have been able to determine, is unique to the 92 to 94 S10 Blazer LTs. The rim is also a bit fatter than the non-leather versions.

EDIT: Added a picture of my original wheel which is in great shape except for a few minor cracks.

1971_CST_C10 · 01-02-2015, 01:36 AM

I could not figure out which one to keep but when I put on the Green 3 spoke comfort grip wheel I knew it was gonna stay on. So now I will sell the other Green one I had, it was from a 1970 impala. both looked cool but I like the 3 spoke and found it in a 1969 olds 442 car.

**Blue/72** · 01-02-2015, 01:43 AM

Mine

4oldcars · 01-02-2015, 10:55 AM

I have always used corvette wheels in my rides, but my brother found me a 61 Impala wheel. I got parts for it on ebay and refinished it to match my truck.

VWNate1 · 01-02-2015, 12:26 PM

Quote:

Originally Posted by CGerow

Thanks Nate, That certainly opens up a TON of possibilities! Thanks for chiming in.
Cam

Finally my Junk Yard experience comes in handy

.

I am loving that 1961 Impala wheel .

**michael bustamante** · 01-02-2015, 01:10 PM

this is exactly the thread i was looking for as this is where im at now! question though. i seen in another thread where a 67 chevelle wheel was used and held the 67-68 chevy truck horn button. does anyone know of any other wheels that hold our horn buttons?

Step-Ed · 01-02-2015, 01:50 PM

The stock steeringwheel is like new, no cracks.
I love the wood 3 spoke

**SoCoC10** · 01-04-2015, 11:41 AM

Sport grip wheel on my 65 Chevelle SS. If I remember correctly, the Muscle Factory makes this high quality reproduction wheel.

**chewychevy67** · 01-04-2015, 12:43 PM

A 67 impala steering wheel im putting in my 67 gmc. I used my cst horn button and made it smaller so it would fit in the horn ring and appear factory. Truck isnt finished so no inerior pics yet.

**leddzepp** · 01-04-2015, 12:50 PM

Quote:

Originally Posted by michael bustamante

this is exactly the thread i was looking for as this is where im at now! question though. i seen in another thread where a 67 chevelle wheel was used and held the 67-68 chevy truck horn button. does anyone know of any other wheels that hold our horn buttons?

60-66 wheel with the proper horn guts will hold a 67/68 horn button

**michael bustamante** · 01-05-2015, 07:07 PM

Quote:

Originally Posted by leddzepp

60-66 wheel with the proper horn guts will hold a 67/68 horn button

i just picked up a nice 66 p van steer wheel, same as the truck. so do i just remove the plastic piece screwed to the back and install my internals from my 67?

Lico · 09-28-2016, 12:07 AM

Quote:

Originally Posted by allchevy58

From this to that.

Does anyone know if this is a direct swap to a 72 manual steering column? Thanks in advance.

rsgt · 10-01-2016, 10:42 PM

I have had this wheel laying around the garage for 10 years. I put it in my truck, it is a 70 lemans wheel.

poway · 10-07-2016, 10:01 AM

I used the same steering wheel on my 68 and had to use a 73-? turn signal cam, contact spring and contact. The canceling cam is a HELP! part number 83233 I believe. Napa has all of the parts.

n33k0 · 10-07-2016, 02:28 PM

Quote:

Originally Posted by Lico

Does anyone know if this is a direct swap to a 72 manual steering column? Thanks in advance.

I bought my truck with a similar wheel, but with a Chevrolet horn button. It doesn't need any adapter to fit the column in my '72. The only problem I have with this wheel is the spokes block my line of sight to the bottom gauges on the dash.

thetruckrman · 02-18-2017, 02:31 PM

Hey special-K,

What vehicle did you get the seats (white) out of in the pic of the white/bronze truck? They are nice!!!

custom10nut · 02-18-2017, 09:07 PM

Quote:

Originally Posted by BruthaMan

'59 Impala repro wheel on my '78 truck:

If I replace my current wheel, THIS is the one!

VWNate1 · 02-19-2017, 02:06 AM

Wow, that REALLY pops !

.

Andy4639 · 02-19-2017, 07:43 AM

I found this simulated wood wheel on E bay. I have the cracks fixed but haven't started sanding it yet.
It's going in the Ramp Rat truck when done along with the tilt column.

01-01-2015, 11:11 PM	#51
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Post your Off year steering wheel pics? Here's one similar to a couple of 88-94 truck and van wheels already posted. However, this one is leather wrapped and, as far as I have been able to determine, is unique to the 92 to 94 S10 Blazer LTs. The rim is also a bit fatter than the non-leather versions. EDIT: Added a picture of my original wheel which is in great shape except for a few minor cracks. Attached Images Last edited by FirstOwner69; 01-01-2015 at 11:35 PM.

01-02-2015, 01:36 AM	#52
1971_CST_C10 Registered User Join Date: Oct 2014 Location: Calgary, Alberta. Posts: 32	Re: Post your Off year steering wheel pics? I could not figure out which one to keep but when I put on the Green 3 spoke comfort grip wheel I knew it was gonna stay on. So now I will sell the other Green one I had, it was from a 1970 impala. both looked cool but I like the 3 spoke and found it in a 1969 olds 442 car. __________________ 1967 C10 Shortbox 1971 Monte Carlo SS buckets and console #'s car 1970 350 Monte Carlo bench seat 1970 El Camino SS

01-02-2015, 01:43 AM	#53
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Post your Off year steering wheel pics? Mine Attached Images __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-02-2015, 10:55 AM	#54
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: Post your Off year steering wheel pics? I have always used corvette wheels in my rides, but my brother found me a 61 Impala wheel. I got parts for it on ebay and refinished it to match my truck. Attached Images __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

01-02-2015, 01:10 PM	#56
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Post your Off year steering wheel pics? this is exactly the thread i was looking for as this is where im at now! question though. i seen in another thread where a 67 chevelle wheel was used and held the 67-68 chevy truck horn button. does anyone know of any other wheels that hold our horn buttons? __________________ 1967custom

01-02-2015, 01:50 PM	#57
Step-Ed Registered User Join Date: Dec 2014 Location: Almere Netherlands Posts: 37	Re: Post your Off year steering wheel pics? The stock steeringwheel is like new, no cracks. I love the wood 3 spoke

01-04-2015, 11:41 AM	#58
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,343	Re: Post your Off year steering wheel pics? Sport grip wheel on my 65 Chevelle SS. If I remember correctly, the Muscle Factory makes this high quality reproduction wheel. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

01-04-2015, 12:43 PM	#59
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Post your Off year steering wheel pics? A 67 impala steering wheel im putting in my 67 gmc. I used my cst horn button and made it smaller so it would fit in the horn ring and appear factory. Truck isnt finished so no inerior pics yet. Attached Images

10-01-2016, 10:42 PM	#63
rsgt Registered User Join Date: Apr 2009 Location: Lowell AR Posts: 360	Re: Post your Off year steering wheel pics? I have had this wheel laying around the garage for 10 years. I put it in my truck, it is a 70 lemans wheel. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=698292

10-07-2016, 10:01 AM	#64
poway Registered User Join Date: Jun 2012 Location: Poway, CA Posts: 119	Re: Post your Off year steering wheel pics? I used the same steering wheel on my 68 and had to use a 73-? turn signal cam, contact spring and contact. The canceling cam is a HELP! part number 83233 I believe. Napa has all of the parts.

02-18-2017, 02:31 PM	#66
thetruckrman Registered User Join Date: Feb 2017 Location: Helena, AL Posts: 17	Re: Past your Off year steering wheel pics? Hey special-K, What vehicle did you get the seats (white) out of in the pic of the white/bronze truck? They are nice!!!

02-19-2017, 02:06 AM	#68
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,665	Impala Steering Wheel Wow, that REALLY pops ! . __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

02-19-2017, 07:43 AM	#69
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Post your Off year steering wheel pics? I found this simulated wood wheel on E bay. I have the cracks fixed but haven't started sanding it yet. It's going in the Ramp Rat truck when done along with the tilt column. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.