Hub Cap Help Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JJanzen** · 11-22-2011, 12:42 PM

Would someone with knowledge of hub caps let me know what these are off of? I am wanting to use these on a 71-72 5 x 5 steel 15" wheel. Is it possible or am I dreaming? Thanks for the help! Joel

flashed · 11-22-2011, 01:28 PM

I think those are from a 67 or 68 truck but someone else with more knowledge will chime in.I have 3 of those hanging on my wall ,been hoping to find a fourth just to make an even set.

**special-K** · 11-22-2011, 01:35 PM

They won't fit. These are the inner clip type used on pre-69 8-lug trucks. There is an identical in appearance hubcap made for the 6-lug 1/2 tons that mounts on the outer nubs,just like the 69-75 and 76-91 style.

**JJanzen** · 11-22-2011, 01:39 PM

Quote:

Originally Posted by special-K

They won't fit. These are the inner clip type used on pre-69 8-lug trucks. There is an identical in appearance hubcap made for the 6-lug 1/2 tons that mounts on the outer nubs,just like the 69-75 and 76-91 style.

Is there a hub cap made in this style that would fit the nubs on a 5 lug 71-72 wheel?

flashed · 11-22-2011, 06:54 PM

I need to look at my 3 caps and see if they are like that on the back .

nds1968 · 11-22-2011, 09:14 PM

Quote:

Originally Posted by JJanzen

Is there a hub cap made in this style that would fit the nubs on a 5 lug 71-72 wheel?

Yes, They look just like those on the outside but the opening on the back is bigger and measures roughly 10-1/4" and fits nub style rims.

http://67-72chevytrucks.com/vboard/s...=dog+dish+caps
http://67-72chevytrucks.com/vboard/s...=dog+dish+caps

Meatman · 11-22-2011, 11:58 PM

I still think it would be easy to transfer the clips to a 16" wheel. I still have the split rims on my truck that I am just going to scrap and I might have to try it.

**JJanzen** · 11-23-2011, 11:19 AM

Quote:

Originally Posted by Meatman

I still think it would be easy to transfer the clips to a 16" wheel. I still have the split rims on my truck that I am just going to scrap and I might have to try it.

Meatman, Any chance you could post a pic of the clips? Sounds like the easiest solution. Has anyone ever tried this and with any luck?

**special-K** · 11-23-2011, 04:21 PM

Quote:

Originally Posted by special-K

...There is an identical in appearance hubcap made for the 6-lug 1/2 tons that mounts on the outer nubs,just like the 69-75 and 76-91 style.

Quote:

Originally Posted by JJanzen

Is there a hub cap made in this style that would fit the nubs on a 5 lug 71-72 wheel?

Quote:

Originally Posted by nds1968

Yes, They look just like those on the outside but the opening on the back is bigger and measures roughly 10-1/4" and fits nub style rims.

Yes,that's what I was trying to say. The 67/68 1/2t caps are outer nub type and look identical to the ones you are asking about. 67-70 are 6-lug wheels and 71-91 are 5-lug. They all take the same size hub cap,so they can be interchanges. All the GM car hubcaps fit,too. So do Fords and some others,if you don't mind another make's name on your truck

.

I just went out and took some pictures. All these hub caps will fit:

**the67Beast** · 02-20-2017, 06:51 PM

Came stock on my 67 C-10 Pickup.

11-22-2011, 12:42 PM	#1
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Hub Cap Help Needed Would someone with knowledge of hub caps let me know what these are off of? I am wanting to use these on a 71-72 5 x 5 steel 15" wheel. Is it possible or am I dreaming? Thanks for the help! Joel Attached Images __________________ Blue72 Red72

11-22-2011, 01:28 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Hub Cap Help Needed I think those are from a 67 or 68 truck but someone else with more knowledge will chime in.I have 3 of those hanging on my wall ,been hoping to find a fourth just to make an even set.

11-22-2011, 01:35 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Hub Cap Help Needed They won't fit. These are the inner clip type used on pre-69 8-lug trucks. There is an identical in appearance hubcap made for the 6-lug 1/2 tons that mounts on the outer nubs,just like the 69-75 and 76-91 style. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-22-2011, 06:54 PM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Hub Cap Help Needed I need to look at my 3 caps and see if they are like that on the back .

11-22-2011, 11:58 PM	#7
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Hub Cap Help Needed I still think it would be easy to transfer the clips to a 16" wheel. I still have the split rims on my truck that I am just going to scrap and I might have to try it. __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

02-20-2017, 06:51 PM	#10
the67Beast Active Member Join Date: Feb 2017 Location: Chapin, SC Posts: 108	Re: Hub Cap Help Needed Came stock on my 67 C-10 Pickup. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.