|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-17-2017, 03:13 AM
|
#1 |
|
Registered User
Join Date: Feb 2017
Location: San Antonio Texas
Posts: 5
|
63 C10 wiring harness.
Hey y'all, have a 63 C10 that needs a new harness, looking for a good source, have seen them in LMC truck, just looking for opinions. Currently has a regulator want to convert to alternator as well but have never done it.
|
|
|
|
02-17-2017, 07:27 AM
|
#2 |
|
Senior Member
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: 63 C10 wiring harness.
What I use is the American auto wire classic update harness. I have one in my 65 and another one on the shelf for my Suburban. Will give you plenty of room to ad stuff to the truck, gets rid of the amp gauge and allows for a one wire alternator. It is a good bit of work to put one in but if you take your time and follow the instructions it really is a good setup.
Jimmy http://www.americanautowire.com/prod...d-restoration/
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
02-17-2017, 10:15 AM
|
#3 | |
|
Registered User
Join Date: Feb 2017
Location: San Antonio Texas
Posts: 5
|
Quote:
|
|
|
|
|
|
02-17-2017, 10:16 AM
|
#4 | |
|
Registered User
Join Date: Feb 2017
Location: San Antonio Texas
Posts: 5
|
Quote:
Posted via Mobile Device |
|
|
|
|
|
02-17-2017, 10:29 AM
|
#5 |
|
Registered User
Join Date: Oct 2007
Location: Marietta, GA
Posts: 805
|
Re: 63 C10 wiring harness.
|
|
|
|
|
02-17-2017, 11:18 AM
|
#6 |
|
Registered User
Join Date: Jul 2015
Location: Spring, TX
Posts: 22
|
Re: 63 C10 wiring harness.
I also installed the American Auto Wire Update kit in my 65. I completed the install in one day, and that was my first time ever installing a complete wiring harness in a vehicle.
Chance
__________________
1966 Chevy C10 SWB |
|
|
|
|
02-18-2017, 06:10 PM
|
#7 |
|
Registered User
Join Date: Feb 2017
Location: San Antonio Texas
Posts: 5
|
Re: 63 C10 wiring harness.
MikeN thanks for the link, great looking truck! Chance66C10, nice to hear it is a good install, thanks for the feedback.
|
|
|
|
|
02-20-2017, 10:38 PM
|
#8 |
|
Registered User
Join Date: Dec 2007
Location: N Texas
Posts: 580
|
Re: 63 C10 wiring harness.
This is X3 votes for Amercian Autowire.
I did the Classic Upgrade kit also, but I added a LOT of modern/electric/custom features. You may be looking for a stock replacement, so check out their stock replacement kit vs LMC too. The stock replacement may go quicker, but the Classic Upgrade takes a lot of time and thought, especially if you have a few custom/modern touches, and to do correctly and solder all your crimps. On the alternator, by all means go with a modern 10SI or 12SI with internal regulator, more amps, and better cooling. I personally recommend the 3 wire hookup for remote sensing, etc. 1 wire alternators are great for tractors. Google MAD Electric for info, and read the FAQs at American Autowire.
__________________
292 + TKO500 Last edited by Heater63; 02-20-2017 at 10:44 PM. Reason: spelling |
|
|
|
|
02-21-2017, 09:54 AM
|
#9 |
|
Registered User
Join Date: Feb 2017
Location: San Antonio Texas
Posts: 5
|
Re: 63 C10 wiring harness.
Awesome thanks for the info!!
|
|
|
|
|
02-22-2017, 04:27 AM
|
#10 |
|
Registered User
Join Date: Dec 2013
Location: California
Posts: 80
|
Re: 63 C10 wiring harness.
what do you guys do with the old harnesses?
I'm searching for just the connector plugs to replace old cracked ones. Firewall plugs, headlight plugs, temp indicator plug, heater resistor, heater switch, etc |
|
|
|
|
02-22-2017, 07:31 AM
|
#11 |
|
Senior Member
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: 63 C10 wiring harness.
A good bit of the harness on my truck was not very good. The 50 years had taken a toll on the plastic. So they went into a box of junk truck wire. One thing that you could do is become a premium member and post a want ad in the for sale section. Lots of folks here with loads of parts and I am sure you can find what you need.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
02-23-2017, 03:20 PM
|
#12 |
|
Registered User
Join Date: Jul 2015
Location: Seattle
Posts: 228
|
Re: 63 C10 wiring harness.
I ordered engine harness and front harness from Classic Parts and am very pleased with fitment and quality
http://www.classicparts.com/Wiring-H.../products/205/
__________________
1961 Chevy Apache "BoomStick" -First build, lots of plans, little experience. What's the worst that could happen? http://67-72chevytrucks.com/vboard/s...d.php?t=694506 |
|
|
|
|
02-23-2017, 08:07 PM
|
#13 |
|
Registered User
Join Date: Feb 2014
Location: Land of the Lost...Bay area,CA
Posts: 80
|
Re: 63 C10 wiring harness.
American Autowire all the way! You get a little more with them than with Painless (new key switch, headlight and dimmer switches too). They include all of the socket ends as well. But the part I like the most about their kit...all of the wires are labelled right on the wire for the entire length of the wires! And their tech support is outstanding as well, should you need it!
|
|
|
|
|
02-23-2017, 10:24 PM
|
#14 |
|
Registered User
Join Date: Apr 2010
Location: bartlett Tn
Posts: 276
|
Re: 63 C10 wiring harness.
American auto wire was an easy hook up on my 63 I would go with it agin if i build another truck
__________________
STEVES 63 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=412554 GIBSON63 YouTube channel https://www.youtube.com/user/1gibsonl4 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
