Wheel for CST10 to look at - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Smittee · 03-12-2017, 09:52 AM

Here are some photos of the wheel we discussed. I have two and they are pretty much identical in condition. I will do what I can to find packaging and a shipping cost fo you in the next couple of days.

CST10 · 03-12-2017, 05:59 PM

Thanks Smittee. See what shipping will run for me and we can go from there.

***Liz*** · 03-12-2017, 07:34 PM

. just to clarify, this was in reply to a WTB by a subscribing member. It was reported a few times. I am sure the user did not intend to upset anyone. Thanks

Smittee · 03-12-2017, 07:49 PM

If I did something wrong I apologize! I have very little experience on these forums as seen by the number of posts!
I did try to send the person a few pictures in a PM but could not get the job done, so this was a route taken to try to satisfy a fellow member. If everyone has their panties in a wad, so to speak, I will remove it and move on in my search to find out things on resto-modding my truck. Rest assured I did NOT mean to upset anyone and really don't need any drama because I screwed up. f an admin would let me know what my next move needs to be just do so and I will. Or if you want to remove it go ahead; I just thought I was helping someone else out.

**LockDoc** · 03-12-2017, 09:40 PM

Quote:

Originally Posted by Smittee

If I did something wrong I apologize! I have very little experience on these forums as seen by the number of posts!
I did try to send the person a few pictures in a PM but could not get the job done, so this was a route taken to try to satisfy a fellow member. If everyone has their panties in a wad, so to speak, I will remove it and move on in my search to find out things on resto-modding my truck. Rest assured I did NOT mean to upset anyone and really don't need any drama because I screwed up. f an admin would let me know what my next move needs to be just do so and I will. Or if you want to remove it go ahead; I just thought I was helping someone else out.

Carry on as you are and don't worry about it..... Don't get so up tight, Liz explained what the deal was and that there was no problem with it.... She is an administrator.

LockDoc

Smittee · 03-13-2017, 08:22 AM

Thanks LockDoc! Really wasn't too uptight and didn't mean to hammer away at Liz. My angst was directed more at those that apparently complained so that the admin had to get involved!
I really do like to play by the rules in my daily life and had no intention of not doing so on here.
Thanks for the kind words. JUst here to learn and maybe help other members out if I can.

**LockDoc** · 03-13-2017, 09:37 AM

Quote:

Originally Posted by Smittee

Thanks LockDoc! Really wasn't too uptight and didn't mean to hammer away at Liz. My angst was directed more at those that apparently complained so that the admin had to get involved!
I really do like to play by the rules in my daily life and had no intention of not doing so on here.
Thanks for the kind words. JUst here to learn and maybe help other members out if I can.

Some get in kind of a hurry reporting stuff without checking to see what's really going on.....

On another note, all of my dads family lives in North Vernon, looks like it's about 30 miles West of you. I used to go out a couple of times a year until my Grandmother passed away a few years ago.

LockDoc

Smittee · 03-13-2017, 08:32 PM

How cool is that LockDoc? I go through there quite often. Have a close friend over that way that serves on a board with me.
If you get over this way again please let me know; there are a couple of good "mom and pop" eateries over that way and we could break bread! If I ever get my truck back on the road I could drive it for that event!

**LockDoc** · 03-13-2017, 10:05 PM

Quote:

Originally Posted by Smittee

How cool is that LockDoc? I go through there quite often. Have a close friend over that way that serves on a board with me.
If you get over this way again please let me know; there are a couple of good "mom and pop" eateries over that way and we could break bread! If I ever get my truck back on the road I could drive it for that event!

Sounds good. I will do that.

LockDoc

03-12-2017, 09:52 AM	#1
Smittee Registered User Join Date: Feb 2017 Location: Dillsboro, IN Posts: 87	Wheel for CST10 to look at Here are some photos of the wheel we discussed. I have two and they are pretty much identical in condition. I will do what I can to find packaging and a shipping cost fo you in the next couple of days. Attached Images Last edited by 70cst; 03-12-2017 at 09:22 PM.

03-12-2017, 05:59 PM	#2
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Wheel for CST10 to look at Thanks Smittee. See what shipping will run for me and we can go from there. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club Last edited by 70cst; 03-12-2017 at 09:23 PM.

03-12-2017, 07:34 PM	#3
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,767	Re: Wheel for CST10 to look at . just to clarify, this was in reply to a WTB by a subscribing member. It was reported a few times. I am sure the user did not intend to upset anyone. Thanks

03-12-2017, 07:49 PM	#4
Smittee Registered User Join Date: Feb 2017 Location: Dillsboro, IN Posts: 87	Re: Wheel for CST10 to look at If I did something wrong I apologize! I have very little experience on these forums as seen by the number of posts! I did try to send the person a few pictures in a PM but could not get the job done, so this was a route taken to try to satisfy a fellow member. If everyone has their panties in a wad, so to speak, I will remove it and move on in my search to find out things on resto-modding my truck. Rest assured I did NOT mean to upset anyone and really don't need any drama because I screwed up. f an admin would let me know what my next move needs to be just do so and I will. Or if you want to remove it go ahead; I just thought I was helping someone else out.

03-13-2017, 08:22 AM	#6
Smittee Registered User Join Date: Feb 2017 Location: Dillsboro, IN Posts: 87	Re: Wheel for CST10 to look at Thanks LockDoc! Really wasn't too uptight and didn't mean to hammer away at Liz. My angst was directed more at those that apparently complained so that the admin had to get involved! I really do like to play by the rules in my daily life and had no intention of not doing so on here. Thanks for the kind words. JUst here to learn and maybe help other members out if I can.

03-13-2017, 08:32 PM	#8
Smittee Registered User Join Date: Feb 2017 Location: Dillsboro, IN Posts: 87	Re: Wheel for CST10 to look at How cool is that LockDoc? I go through there quite often. Have a close friend over that way that serves on a board with me. If you get over this way again please let me know; there are a couple of good "mom and pop" eateries over that way and we could break bread! If I ever get my truck back on the road I could drive it for that event!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.