Radiator Hoses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Afirehawk1 · 03-13-2017, 03:59 PM

I am running a 1967 - 396 with a short water pump and an engineering cooling products radiator (speed cool); any suggestions on findings radiator hoses that would work?

vin63 · 03-13-2017, 05:39 PM

Do you have an older, independent auto parts store near you that will allow you to look in the back or stockroom for a couple of hoses that have the correct basic bends and contours (you may have to trim what you find)? I usually draw out the length and note the bends that I need, and there is an old Napa store near me that has hundreds of hoses that I can pick through. I recently had to do this for a Pontiac restoration project where there are no longer any refrenceable part numbers.

If not, the other route that I take is making mine from leftover steel J- and U-bend tubing, making pie cuts, and welding them together for the compound bends. I did this for my C10 (radiator tubing between my zoomies) and my old Super Gas drag car, using short pieces of hose for the connections:

Afirehawk1 · 03-13-2017, 06:40 PM

Good info
Thanks

**Captainfab** · 03-13-2017, 11:35 PM

Depending on what radiator you are running, you may be able to make use of the hoses for a '68-'71 C10/20/30with a 396/402. When I put the 454 in my '66 Suburban, I did the same thing Vin63 said. I went to a local auto parts store and hunted thru a bunch of hoses until I found a couple I could cut up and make work.

conquistador · 03-14-2017, 09:58 AM

Quote:

Originally Posted by Captainfab

Depending on what radiator you are running, you may be able to make use of the hoses for a '68-'71 C10/20/30with a 396/402. When I put the 454 in my '66 Suburban, I did the same thing Vin63 said. I went to a local auto parts store and hunted thru a bunch of hoses until I found a couple I could cut up and make work.

I just had a new radiator installed and my mechanic said he used late 60's Camarillo hoses. You might check with that. The looked like they belonged on the engine.
Posted via Mobile Device

Afirehawk1 · 03-14-2017, 10:08 AM

Ok now im puzzled
What the heck is a Camarillo?

**PGSigns** · 03-14-2017, 11:35 AM

It's a city in California. Must make hoses there.
Jimmy

Mackie · 03-14-2017, 01:14 PM

Gotta love auto-correct.

Camarillo is the home of that Horrible Fright Co

61K10 · 03-14-2017, 01:15 PM

a pic of your rad and the size of the outlets would help. I would say BB chevelle 66-67. might have to trim some, if they fit the outlets.

forestb · 03-14-2017, 04:22 PM

Quote:

Originally Posted by Afirehawk1

Ok now im puzzled
What the heck is a Camarillo?

Just in case you are still stumped I think he meant Camaro. But you might already know that.

Afirehawk1 · 03-14-2017, 08:32 PM

Great info gang. Many thanks!!

conquistador · 03-15-2017, 07:30 AM

Sorry, you are right, I meant Camaro. Fat fingers, little keyboard, and I have invented Chevy's next smart car the Camarillo.

Afirehawk1 · 03-15-2017, 08:40 AM

Im a Camaro guy at heart
Many thanks

03-13-2017, 03:59 PM	#1
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	Radiator Hoses I am running a 1967 - 396 with a short water pump and an engineering cooling products radiator (speed cool); any suggestions on findings radiator hoses that would work?

03-13-2017, 05:39 PM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Radiator Hoses Do you have an older, independent auto parts store near you that will allow you to look in the back or stockroom for a couple of hoses that have the correct basic bends and contours (you may have to trim what you find)? I usually draw out the length and note the bends that I need, and there is an old Napa store near me that has hundreds of hoses that I can pick through. I recently had to do this for a Pontiac restoration project where there are no longer any refrenceable part numbers. If not, the other route that I take is making mine from leftover steel J- and U-bend tubing, making pie cuts, and welding them together for the compound bends. I did this for my C10 (radiator tubing between my zoomies) and my old Super Gas drag car, using short pieces of hose for the connections: __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

03-13-2017, 06:40 PM	#3
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	Re: Radiator Hoses Good info Thanks

03-13-2017, 11:35 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Radiator Hoses Depending on what radiator you are running, you may be able to make use of the hoses for a '68-'71 C10/20/30with a 396/402. When I put the 454 in my '66 Suburban, I did the same thing Vin63 said. I went to a local auto parts store and hunted thru a bunch of hoses until I found a couple I could cut up and make work. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-14-2017, 10:08 AM	#6
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	Re: Radiator Hoses Ok now im puzzled What the heck is a Camarillo?

03-14-2017, 11:35 AM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Radiator Hoses It's a city in California. Must make hoses there. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

03-14-2017, 01:14 PM	#8
Mackie Registered User Join Date: Jun 2011 Location: WNC Posts: 226	Re: Radiator Hoses Gotta love auto-correct. Camarillo is the home of that Horrible Fright Co __________________ `63 C-10 Shortwide Roller 305 LT1 cam, Eddy 500 T5

03-14-2017, 01:15 PM	#9
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Radiator Hoses a pic of your rad and the size of the outlets would help. I would say BB chevelle 66-67. might have to trim some, if they fit the outlets. __________________ 1961 chevy K10 my build is------------61K10 build

03-14-2017, 08:32 PM	#11
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	Re: Radiator Hoses Great info gang. Many thanks!!

03-15-2017, 07:30 AM	#12
conquistador Registered User Join Date: Mar 2017 Location: Bowling Green, KY Posts: 15	Re: Radiator Hoses Sorry, you are right, I meant Camaro. Fat fingers, little keyboard, and I have invented Chevy's next smart car the Camarillo.

03-15-2017, 08:40 AM	#13
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	Re: Radiator Hoses Im a Camaro guy at heart Many thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.