wire brushing outer grill???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 04-03-2004, 12:27 AM

my outer grill is knicked and bent so when i work the metal back to new it will look different, so i am thinking that if i wire wheel the whole grill it will hide these imperfections. if it doesnt work i can always etch prime and paint it the same color of the body. What do yall think?

guitarornothin · 04-03-2004, 12:29 AM

I wouldnt Wire brush it, i think itdll look like ****

>X< · 04-03-2004, 12:40 AM

i know, but i'm thinking it would at least be uniformly crappy, hahah, instead of dented and partially crappy with half crome and half scratches

1972ChevyGuy · 04-03-2004, 09:29 PM

I took light sandpaper to mine, gave it an aluminum look that I kinda like. Sprayed it with clear coat after that, definatly not show car chrome but clear aluminum seems cool enough for me

04-03-2004, 12:27 AM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	wire brushing outer grill???? my outer grill is knicked and bent so when i work the metal back to new it will look different, so i am thinking that if i wire wheel the whole grill it will hide these imperfections. if it doesnt work i can always etch prime and paint it the same color of the body. What do yall think? __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-03-2004, 12:29 AM	#2
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	I wouldnt Wire brush it, i think itdll look like ** __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please** ,/.

04-03-2004, 12:40 AM	#3
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	i know, but i'm thinking it would at least be uniformly crappy, hahah, instead of dented and partially crappy with half crome and half scratches __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-03-2004, 09:29 PM	#4
1972ChevyGuy Registered User Join Date: Nov 2002 Location: Kannapolis, NC Posts: 552	I took light sandpaper to mine, gave it an aluminum look that I kinda like. Sprayed it with clear coat after that, definatly not show car chrome but clear aluminum seems cool enough for me



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.