|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-18-2017, 09:18 PM
|
#1 |
|
Registered User
Join Date: Dec 2016
Location: Anchorage Alaska
Posts: 74
|
Who would have thought
That finding a heater blower motor wheel would be this difficult. 1965 Chevy K10 Suburban, 283, AT. Wheel - CW rotation, H 2.6875", Dia 5.5625", Shaft dia .3125", inset .75", Shaft length 1.25", Shaft flat .625", Shaft has threaded end. Any help/leads would be greatly appreciated.
|
|
|
|
02-18-2017, 09:23 PM
|
#2 |
|
Registered User
Join Date: Jun 2013
Location: Somewhere
Posts: 3,122
|
Re: Who would have thought
Try a 73+ motor. Rumor has it they're faster...
Or by wheel do you mean the squirrel cage blower bit? Not sure on 60-66, sorry. |
|
|
|
|
02-19-2017, 01:25 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Who would have thought
Have you tried looking the '60-'66 classifieds section here on the forum? There are a couple guys parting out trucks. If you can't find one there, you can get them brand new here.
http://www.classicparts.com/1960-91-.../#.WKkrlvIvCUk That will also give you an idea of the wide year range and applications that used that exact same blower wheel.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
02-19-2017, 02:30 AM
|
#4 |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Who would have thought
i installed one from an 87 in mine
ron |
|
|
|
|
03-03-2017, 08:11 PM
|
#5 |
|
Chevy addict
Join Date: May 2012
Location: Iron Ridge, WI
Posts: 1,085
|
Re: Who would have thought
1980s blower motor for AC works great but can make your windows whistle
|
|
|
|
|
03-03-2017, 10:31 PM
|
#6 |
|
Registered User
Join Date: Dec 2016
Location: Anchorage Alaska
Posts: 74
|
Re: Who would have thought
It's the wheel/squirrel cage/fan that I'm looking for. Still haven't found one with the right dimensions. I can deal with less height and less diameter (but the increased gap between the wheel and the housing would mean less air transfer), but the inset has been the problem.
|
|
|
|
|
03-20-2017, 10:20 PM
|
#7 |
|
Registered User
Join Date: Feb 2014
Location: San Pablo
Posts: 43
|
Re: Who would have thought
PM Sent
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
