Wood floor gap between frame

[Trackman101]

I am converting a shorten long box steel bed to a short bed wood floor (a prior owner shortened) and was wondering what is the expected gap between the floor and the frame rail.With my new sills on it is flush to the frame. Am I missing some spacers? I will put my box together and see how alignment is next with the rest of the truck. Hopefully I can add some spacers to gain clearance and keep good alignment. Any guidance would be appreciated.

[bs46488]

On my wood floor, the highest part of the frame and the wood might have a finger width.

There are rubber pads that go under the cross sills on top of the frame. Do you have those?

[GR8-68]

Do you have all the parts for a wood floor bed ? Not sure what gap you are speaking of

[Trackman101]

Originally Posted by bs46488

On my wood floor, the highest part of the frame and the wood might have a finger width.

There are rubber pads that go under the cross sills on top of the frame. Do you have those?

I do not have any rubber pads just a thin galvanized plate under each sill . How thick are the rubber pads? I'll get the box on tomorrow and check alignment.