Parts house recommendations down south? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fotyfobravo · 03-20-2017, 10:48 AM

I finally have time to start on the restoration of my 70 GMC short bed which has sat patiently in my dry basement for nearly 20 years. I cranked it and drove a mile or two every year and kept the fluids fresh.

Any recommendations for parts suppliers ??? Especially body trim and interior.

I'm north of Atlanta.

jim-bob · 03-20-2017, 07:02 PM

Quote:

Originally Posted by fotyfobravo

I finally have time to start on the restoration of my 70 GMC short bed which has sat patiently in my dry basement for nearly 20 years. I cranked it and drove a mile or two every year and kept the fluids fresh.

Any recommendations for parts suppliers ??? Especially body trim and interior.

I'm north of Atlanta.

I'm in Fayette county..If my order is going to be large I order from LMC in Kansas, because they pay the freight on orders of $1000. My initial order on my 67 GMC came to a little over $5000. and I think the fill rate was better than 95%..unheard of in my opinion and their Return Policy is great..Then I go to Summit in Mcdonough for fill-ins & etc with very good luck. Their Prepaid frt is $99. and a great return policy..
Hope this helps..

wshattuck · 03-20-2017, 08:06 PM

another option may be www.classicparts.com they are located in Kansas I believe. I met these guys on the power tour last year. ive bought several parts from them and they are very reasonable on shipping.

how about some pics??

**71CHEVYSHORTBED402** · 03-20-2017, 08:49 PM

Classic Heartbeat is my go to. We have a local part's house here, but I'll pass.

flashed · 03-20-2017, 09:37 PM

Where are you in Waleska ? I work downtown at Reinhardt University and would love to see your truck .I use Southern Kentucky Classic as they offer very good service .

**SIXTY9** · 03-21-2017, 06:26 AM

Can't beat http://www.nsanehotrodz.com/ for good quality parts and the very best customer service.

**Grumpy old man** · 03-21-2017, 07:13 AM

Manestruckparts.com mom and pop store , great service fast shipping and good prices , easy to search website
Posted via Mobile Device

67ChevyRedneck · 03-21-2017, 08:09 AM

Body: GM - don't bother with aftermarket panels, you're in GA, there should be workable originals somewhere. If you need patch panels try to stick to key parts branded stuff. It still needs work to fit, but it's not too bad and all of the panels I've bought have been as thick, or actually thicker, than OEM.

Trim: Mar-K.

Interior - check out our forum vendors, most of them are very engrained in the 67-72 world and can give you an honest opinion on what fits and what doesn't.

flashed · 03-21-2017, 09:46 AM

Nsane is great to deal with .

custom10nut · 03-21-2017, 05:36 PM

The Truck Shop in Orange Ca has a shop in Charlotte NC, and are easy to deal with. Look em up on line

**71CHEVYSHORTBED402** · 03-21-2017, 06:06 PM

Quote:

Originally Posted by Grumpy old man

Manestruckparts.com mom and pop store , great service fast shipping and good prices , easy to search website
Posted via Mobile Device

X2.............I've gotten a few parts from them, including a stove & pipe.

flashed · 03-21-2017, 06:10 PM

There is also AMD /Auto Metal Direct here in Ga and I used to have an inside connection there .

14hatchie · 03-22-2017, 10:50 AM

any shops around Memphis Tn?

03-20-2017, 10:48 AM	#1
fotyfobravo Registered User Join Date: Aug 2007 Location: Waleska, Ga Posts: 20	Parts house recommendations down south? I finally have time to start on the restoration of my 70 GMC short bed which has sat patiently in my dry basement for nearly 20 years. I cranked it and drove a mile or two every year and kept the fluids fresh. Any recommendations for parts suppliers ??? Especially body trim and interior. I'm north of Atlanta. Last edited by fotyfobravo; 03-20-2017 at 11:14 AM.

03-20-2017, 08:06 PM	#3
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: Parts house recommendations down south? another option may be www.classicparts.com they are located in Kansas I believe. I met these guys on the power tour last year. ive bought several parts from them and they are very reasonable on shipping. how about some pics?? __________________ 1969 C10, ZZ502, T400, A/C, WoodBed, Bucket Seats 1965 C10, 5.3LS, 4L60, Vintage Air, Woodbed

03-20-2017, 08:49 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,322	Re: Parts house recommendations down south? Classic Heartbeat is my go to. We have a local part's house here, but I'll pass. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-20-2017, 09:37 PM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Parts house recommendations down south? Where are you in Waleska ? I work downtown at Reinhardt University and would love to see your truck .I use Southern Kentucky Classic as they offer very good service .

03-21-2017, 06:26 AM	#6
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 504	Re: Parts house recommendations down south? Can't beat http://www.nsanehotrodz.com/ for good quality parts and the very best customer service.

03-21-2017, 07:13 AM	#7
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Parts house recommendations down south? Manestruckparts.com mom and pop store , great service fast shipping and good prices , easy to search website Posted via Mobile Device

03-21-2017, 08:09 AM	#8
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parts house recommendations down south? Body: GM - don't bother with aftermarket panels, you're in GA, there should be workable originals somewhere. If you need patch panels try to stick to key parts branded stuff. It still needs work to fit, but it's not too bad and all of the panels I've bought have been as thick, or actually thicker, than OEM. Trim: Mar-K. Interior - check out our forum vendors, most of them are very engrained in the 67-72 world and can give you an honest opinion on what fits and what doesn't. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-21-2017, 09:46 AM	#9
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Parts house recommendations down south? Nsane is great to deal with .

03-21-2017, 05:36 PM	#10
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,887	Re: Parts house recommendations down south? The Truck Shop in Orange Ca has a shop in Charlotte NC, and are easy to deal with. Look em up on line

03-21-2017, 06:10 PM	#12
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Parts house recommendations down south? There is also AMD /Auto Metal Direct here in Ga and I used to have an inside connection there .

03-22-2017, 10:50 AM	#13
14hatchie Registered User Join Date: Feb 2011 Location: brownsville tennessee Posts: 37	Re: Parts house recommendations down south? any shops around Memphis Tn?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.