WA Parting out. '69 1/2 ton big block

[72lowlife]

Im on the hunt. Bought a truck with a bad c notch. How to part with it?

[randy500]

BTW....this is how rusty it is....when I got it home I opened the door and it dropped all the way to the driveway, I tugged it a bit and it completely detached from the cab with the hinges still on the door...

[randy500]

Originally Posted by 72lowlife

Im on the hunt. Bought a truck with a bad c notch. How to part with it?

You planning on changing the frame or repairing the C notch? I have a clean frame cut of the C notch area.

[72lowlife]

I wanted to start from scratch. I plan on still notching the frame and boxing it. I just have a little more skill and know how then the guy who did it before.

[randy500]

Originally Posted by 72lowlife

I wanted to start from scratch. I plan on still notching the frame and boxing it. I just have a little more skill and know how then the guy who did it before.

Got it. A frame should pop up here on the forum then.

[70STOVEBOLT]

Originally Posted by randy500

Pics of the hangars the top ones are under the cab for a 72, RH side is on the right and the view your looking at is from the front of the truck, just look at one at a time to envision how they mount. Bottom left is under cab mount for 69-71 at least, that one is drivers side. Bottom right is above the axle hangar.

Sorry but I realized I need them for a truck I am building...I usually only build 72's is why I think I thought they were for sale.

I'm just posting the picture since I went out and took it and for future reference.

The bottom pictures are of the 69-71 tailpipe hangars.

Randy, I am a little confused. The pics you posted are of the hangers off this 69 or they are from a 72? I am going to save the pics so I know what to look for. If you run across another set, please keep me in mind.

Thanks,
Mark

[dave666693]

Originally Posted by randy500

I would sell that engine for $400, I am taking it out in between now and Sunday if you want to hear it run.

I will go ahead and get it started up today and see how it runs.

did you get the engine started?

[m7vasque]

Originally Posted by randy500

Drag link $40, steering box, $50 plus shipping on both.

Center link still available? How much for it shipped to 92024

[randy500]

Don't have it anymore.

[Richard]

Tail light trim? Could use a driver set. Want the screws and cone washers that secure the trim.

[randy500]

I don't sell those trim pieces because I have never in 50 tries been able to get one off without mucho damage, I don't sell the screws and especially the cone washers, because they are hard to come by, thanks though.

[Richard]

Not even for $20 a piece?

[randy500]

Originally Posted by Richard

Not even for $20 a piece?

If you want to pay $20 then I would try to remove them, I have one off right now. I will take the other ones off tomorrow and let you know how it turns out. There are 3 out there to be removed.
I will inventory my screw spacers and let you know on that too.

The way I see it is, they are about $15 new, so what are they worth used....
And shipping is at least $15 or so, I hope you see my point.

[BrianD69]

is the front bumper still available?

[randy500]

Originally Posted by BrianD69

is the front bumper still available?

I do still have it, if you want I can send you some pictures, PM your phone number

[BrianD69]

2533032579

[undertaker72]

Originally Posted by 72lowlife

I wanted to start from scratch. I plan on still notching the frame and boxing it. I just have a little more skill and know how then the guy who did it before.

I don't want to get in between you and Randy Deal on a frame but I have one here and Utah or I actually have a couple if you're interested but I don't want to get in between you and his deal it's a shorter travel distance but I understand

[randy500]

Originally Posted by BrianD69

2533032579

Pics sent via text

[Dave]

Randy,
Interested in all 3 '72 exhaust hangers pictured on the previous page. When you can lmk price shipped, thanks.
Dave.