The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-28-2004, 07:41 PM   #1
charles oliver
68 camtruck
 
charles oliver's Avatar
 
Join Date: Mar 2000
Location: Harrison, Ohio USA
Posts: 233
Fluids

I have a 71 Jimmy anyone know what kind and weight of oil
goes in the Rearends. I don't think they are posi. No tags or anything. Front is a 10 bolt back is a 12 bolt ?

What kind of oil goes in the Transfer case ?

I looked in the Haines Manual and it didnt' say.

Thanks
Charlie

__________________
71 GMC Jimmy 4X4
68 Huger Orange Camaro 454 with TH400 :gmc
:
charles oliver is offline   Reply With Quote
Old 03-28-2004, 07:48 PM   #2
WRMZ71
Cause the Chicks DIG IT!!
 
WRMZ71's Avatar
 
Join Date: Nov 2003
Location: Beaufort SC
Posts: 509
If you don't have posi then plain old 80-90W will do you fine. I use valvoline. As far as the transfer goes and somebody please correct me if I"m wrong but straight 10w should be fine.
WRMZ71 is offline   Reply With Quote
Old 03-28-2004, 07:53 PM   #3
charles oliver
68 camtruck
 
charles oliver's Avatar
 
Join Date: Mar 2000
Location: Harrison, Ohio USA
Posts: 233
Fluids

What happens if you put the posi aditive and its not posi?
Would it hurt anything.


This Jimmy is new to me and I haven't driven it much yet so don't really know if its posi or not. I know on the cars they usually have a tag on the rearend if it is posi. These do not.

Thanks
Charlie
__________________
71 GMC Jimmy 4X4
68 Huger Orange Camaro 454 with TH400 :gmc
:
charles oliver is offline   Reply With Quote
Old 03-28-2004, 09:31 PM   #4
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,602
If you are using valvoline then use the 75/90 with a GL-5 rating in BOTH the rear and T-case, that way if there is a posi in the rear it is rated for it, if no posi---well it won't matter.
kwmech is offline   Reply With Quote
Old 03-28-2004, 09:35 PM   #5
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
if you have the cash, fill them with synthetic, you'll probably never need to chainge it again if you do so. (acording to our indipendedn oil lab at work)
Longhorn Man is offline   Reply With Quote
Old 04-04-2004, 03:48 PM   #6
sbc350gearhead
Registered User
 
sbc350gearhead's Avatar
 
Join Date: Mar 2003
Location: Columbus Ohio
Posts: 1,413
Longhorn is correct........unless you submerge the rearend, and get water into the lube.............very bad.
sbc350gearhead is offline   Reply With Quote
Old 04-04-2004, 03:49 PM   #7
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Good point, if it gets contaminated, it'll need imidiate attention, regardless of your lube of choice.
Longhorn Man is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com