rear airbags

[68chevy]

ok i am thinking of putting bags on the rear of my truck it is a coil spring rearend i can make the top brackets but what do i do for bottom brackets? thanks for any suggestions o yea i almost forgot do i need a c notch right now im on a very tight budget can i do with out it for a little while? or is it mandetory

[This message has been edited by 68chevy (edited 12-19-2001).]

[NSANE68!!!]

Back is a piece of cake. Run a grade8 bolt right through the original hole in the trailing arm right into the bag. On top drill 2 holes in the frame for the bag studs and a little notch in the frame for the air inlet hole. As for the C-notch it is not manditoty at all unless you want maximum drop while parking, cause you have total control of the air pressure. If it bottoms out put some more air in. Good luck

------------------
68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's////// 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's////// 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw