New '72 cruise switch For Sale on ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 03-31-2004, 03:25 PM

"Cruise Master" switch I put on ebay a few days ago. I bought it as NOS from a board member a year or so ago. I don't have the original box, but it is obviously new. Since my truck is a '70, I decided to go with a "year correct' switch. http://cgi.ebay.com/ebaymotors/ws/eB...ESSE%3AIT&rd=1

**Gary 70 Jimmy** · 04-02-2004, 10:47 AM

I need to know if it will plug into this one can you get a good pic of the plug in.

Rod · 04-02-2004, 06:22 PM

You would still need a second set of wiring ... you need the wiring between the switch and the servo also. Bu the switch would work with the correct secondary wiring.

**PICKMUP** · 04-03-2004, 12:00 AM

I don't know where it goes. Was there more than one style? I have a 72 system, but I didn't get to take it out of the truck, so thought maybe it was not complete. It looks exactly like the one in my 71 Chev Chassis Service Manual, but I do not see this switch and harness. I either don't have it or don't need it??? Any more info?

blaznorange · 04-04-2004, 10:39 PM

Hugger

I need shipping cost to 56557 before I can pay you. Not sure if you have been getting my emails.

Thanks
Adam

03-31-2004, 03:25 PM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	New '72 cruise switch For Sale on ebay "Cruise Master" switch I put on ebay a few days ago. I bought it as NOS from a board member a year or so ago. I don't have the original box, but it is obviously new. Since my truck is a '70, I decided to go with a "year correct' switch. http://cgi.ebay.com/ebaymotors/ws/eB...ESSE%3AIT&rd=1 __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-02-2004, 06:22 PM	#3
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	You would still need a second set of wiring ... you need the wiring between the switch and the servo also. Bu the switch would work with the correct secondary wiring. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

04-03-2004, 12:00 AM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Doesn't look right I don't know where it goes. Was there more than one style? I have a 72 system, but I didn't get to take it out of the truck, so thought maybe it was not complete. It looks exactly like the one in my 71 Chev Chassis Service Manual, but I do not see this switch and harness. I either don't have it or don't need it??? Any more info? __________________ Email: frankeham@comcast.net Phone: 360-956-7170

04-02-2004, 10:47 AM	#2
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	I need to know if it will plug into this one can you get a good pic of the plug in.

04-04-2004, 10:39 PM	#5
blaznorange Registered User Join Date: Jan 2002 Location: Mahnomen, MN Posts: 29	Hugger I need shipping cost to 56557 before I can pay you. Not sure if you have been getting my emails. Thanks Adam



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.