transmission humps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lattimer · 04-10-2017, 10:30 AM

Don't know if anyone has seen these before. I was on American powertrain's website looking for other info and stumbled on these.

http://americanpowertrain.com/i-2388...nnel-hump.html

OregonNed · 04-10-2017, 10:44 AM

Thought I'd seen these before, and now I can book mark this. My truck has a floor cable shifter and the PO pop-riveted a sheet metal piece to cover the hole. When I change shifters I was going to have mine welded up and restored, so this might be a better option.

Lattimer · 04-10-2017, 11:23 AM

Quote:

Originally Posted by OregonNed

Thought I'd seen these before, and now I can book mark this. My truck has a floor cable shifter and the PO pop-riveted a sheet metal piece to cover the hole. When I change shifters I was going to have mine welded up and restored, so this might be a better option.

Mine has been cut for 3 different transmissions in its life (2 of which I did), and I'd like to have a removable hump anyways. So someday if I ever get the motivation.....

I had never seen them before. I know when I did the trans swap I spent a lot of time trying to find a decent high hump for sale. Turned out the TKO fit under the low hump without any issue.

**kwmech** · 04-10-2017, 10:07 PM

It'd be nicer if it was stamped out of steel instead of fiberglass

69chevytrucker · 04-10-2017, 10:21 PM

i made mine using a hump from a 83 blazer just had to cut a few inches out and weld it back together the overall outside lips fit pretty good

CG · 04-11-2017, 12:35 AM

Board member had a nice one for sale quite awhile before someone purchased it. I think it was a different company though. It sure looked good in the pic.

http://67-72chevytrucks.com/vboard/s...ght=fiberglass

04-10-2017, 10:30 AM	#1
Lattimer Registered User Join Date: Jan 2013 Location: Mickleton, NJ Posts: 1,776	transmission humps Don't know if anyone has seen these before. I was on American powertrain's website looking for other info and stumbled on these. http://americanpowertrain.com/i-2388...nnel-hump.html __________________ Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881

04-10-2017, 10:44 AM	#2
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: transmission humps Thought I'd seen these before, and now I can book mark this. My truck has a floor cable shifter and the PO pop-riveted a sheet metal piece to cover the hole. When I change shifters I was going to have mine welded up and restored, so this might be a better option. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

04-10-2017, 10:07 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: transmission humps It'd be nicer if it was stamped out of steel instead of fiberglass

04-10-2017, 10:21 PM	#5
69chevytrucker Registered User Join Date: Apr 2014 Location: calgary alberta Posts: 1,248	Re: transmission humps i made mine using a hump from a 83 blazer just had to cut a few inches out and weld it back together the overall outside lips fit pretty good

04-11-2017, 12:35 AM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: transmission humps Board member had a nice one for sale quite awhile before someone purchased it. I think it was a different company though. It sure looked good in the pic. http://67-72chevytrucks.com/vboard/s...ght=fiberglass __________________ … … … … … … … … ... … … … … … … … … … … …



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.