NV WTB Sport Mirror Backing Plates with Fixed Nuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 04-05-2017, 10:59 PM

Just getting ready to drill out the holes in my doors when I realized I bought a "Pair" of RH backing plates. Go figure.

A LH plate is needed as soon as possible. I'll buy a pair if necessary. Some pitting okay.

Here's what they look like. At least the RH side anyway. Thank you

**71CHEVYSHORTBED402** · 04-06-2017, 10:46 AM

ttt

**71CHEVYSHORTBED402** · 04-07-2017, 12:57 PM

I just used a tap plate as a template, so I don't need one "right away". But.........Bump.

**71CHEVYSHORTBED402** · 04-09-2017, 12:05 PM

ttt

**71CHEVYSHORTBED402** · 04-10-2017, 05:15 PM

ttt

**71CHEVYSHORTBED402** · 04-12-2017, 01:10 PM

ttt

**GR8-68** · 04-12-2017, 01:50 PM

Is this for the rectangular shaped mirrors? I may possibly have one

**71CHEVYSHORTBED402** · 04-12-2017, 01:57 PM

Quote:

Originally Posted by GR8-68

Is this for the rectangular shaped mirrors? I may possibly have one

These mirrors........thank you......
http://www.ebay.com/itm/1967-1972-ch...9VDb0G&vxp=mtr

**GR8-68** · 04-13-2017, 04:08 PM

Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them.

**71CHEVYSHORTBED402** · 04-13-2017, 05:21 PM

Quote:

Originally Posted by GR8-68

Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them.

Awesome dude. Looks like three times is a charm (long story). PM sent & THANK YOU for the good gesture.

**71CHEVYSHORTBED402** · 04-21-2017, 12:31 PM

Quote:

Originally Posted by GR8-68

Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them.

Don't know what I was looking at. Seriously, I GOT TO USE MY GLASSES @ COMPUTER. But these plates suit plan B nicely.....clean & nice deal, TY. Unless I miraculously strike a LH (no longer a priority - LONG story fourth shot, and not always my eyes

) I'm just going to use K-nuts. These have my attention though, pending response: http://dragonplate.com/ecart/product...wwQaAiyg8P8HAQ

In the meantime, I carefully drilled out the plates to 1/4", and the plates work perfectly. Easy access even without fixed nuts. Sure a lot of mirror holes in these doors (11 per side). Bondo says the original owner smashed his camper mirror.

04-05-2017, 10:59 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	WTB Sport Mirror Backing Plates with Fixed Nuts Just getting ready to drill out the holes in my doors when I realized I bought a "Pair" of RH backing plates. Go figure. A LH plate is needed as soon as possible. I'll buy a pair if necessary. Some pitting okay. Here's what they look like. At least the RH side anyway. Thank you __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-06-2017, 10:46 AM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-07-2017, 12:57 PM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: WTB Sport Mirror Backing Plates with Fixed Nuts I just used a tap plate as a template, so I don't need one "right away". But.........Bump. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-09-2017, 12:05 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-10-2017, 05:15 PM	#5
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-12-2017, 01:10 PM	#6
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-12-2017, 01:50 PM	#7
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: WTB Sport Mirror Backing Plates with Fixed Nuts Is this for the rectangular shaped mirrors? I may possibly have one __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

04-13-2017, 04:08 PM	#9
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: WTB Sport Mirror Backing Plates with Fixed Nuts Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.