SO i bought some slots from a board member.. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joesjunk** · 11-13-2016, 10:29 AM

Here is my thread on it. It says custom bench seat. So I'm guessing that was the Cheyenne type interior?

http://67-72chevytrucks.com/vboard/s...d.php?t=495037

**too much stuff** · 11-13-2016, 01:23 PM

Quote:

Originally Posted by 57taskforce

All 72's came with plastic. Custom deluxe and Cheyenne/super had scrolls and chrome trim on the upper part of the panel. For Cheyenne and super the scrolls are covered by the wood grain insert.

So what would designate getting the woodgrain door panels in a burb?

Quote:

Originally Posted by Joesjunk

I had a 72 K/20 burb a few years ago, all original ( it was bronze, you might remember it) it had Cheyenne interior in it, seat covers, carpet, and wood grain door panel inserts. It was a custom deluxe, but also had something like " custom interior " listed as an option also. It's the only one I have seen like that. I'll see if I can find the SPID pic.

I do remember that one. It came from just north of me. Didn't recall you selling it.
Do you remember this burb? It was in your driveway in late 05 or early 06. We filled the back end with parts....

**Joesjunk** · 11-13-2016, 08:45 PM

Oh man I sure don't remember, but I have a hard time remembering what I did yesterday lol

**too much stuff** · 11-13-2016, 09:04 PM

Quote:

Originally Posted by Joesjunk

Oh man I sure don't remember, but I have a hard time remembering what I did yesterday lol

Maybe this will help you out. Sakohntr (Bruce) Bought this in texas. I think you were holding some parts for him and I was along for the ride. I bought some inner fenders and an outer fender from you. And of course got the grand tour of all your goodies....

**Joesjunk** · 11-13-2016, 09:06 PM

Was this the deal where you drove down a car and left it and drove the burb home?

**too much stuff** · 11-13-2016, 09:08 PM

That's the one. Of course we did that with the napco also....

**jerry moss** · 11-13-2016, 11:15 PM

Eric, love the solid white burb, i need to get started on my 69 K20 burb again. mine only has 4" of lift but is solid white with barn doors too.

**too much stuff** · 11-14-2016, 07:58 PM

Quote:

Originally Posted by jerry moss

Eric, love the solid white burb, i need to get started on my 69 K20 burb again. mine only has 4" of lift but is solid white with barn doors too.

Better get going on it... I have a feeling you are like me in that you have a lot of projects to work on, just a matter of which one gets the attention.
Not sure on the lift in this one. The original ad said it was 6" but it seems like maybe more to me. Not sure how legal it will be once I put the 37"s on it.

**too much stuff** · 11-19-2016, 11:42 PM

On hold for a little bit now. Got the engine for it dug out and in the garage and then this happened. Hopefully it will melt some and I can do some more out door things. (about 14" of snow)

**special-K** · 11-20-2016, 09:49 AM

Kinda takes the fun out of working on them outside, ey?

**too much stuff** · 11-20-2016, 10:33 AM

Quote:

Originally Posted by special-K

Kinda takes the fun out of working on them outside, ey?

Sure does! and 14 degrees this am to boot. I don't think that "tank" will fit in the garage and still be able to get around it.

**too much stuff** · 11-20-2016, 07:36 PM

This should move that burb around pretty good.

**special-K** · 11-20-2016, 09:01 PM

A BBBurb. That just seems right. Typing that made me feel like George Thorogood

**too much stuff** · 04-29-2017, 07:54 PM

So things have changed some... I parted a rusty low mile 72 K-20 that ran good. I figured the 350 4bbl would be more at home in the burb and make life easier with the install. Even close to numbers matching...
Went to install the engine last weekend and ran into an "issue"... Will let the pics do the talking. On a brief hold again.

**undertaker72** · 04-29-2017, 07:59 PM

Quote:

Originally Posted by too much stuff

So things have changed some... I parted a rusty low mile 72 K-20 that ran good. I figured the 350 4bbl would be more at home in the burb and make life easier with the install. Even close to numbers matching...
Went to install the engine last weekend and ran into an "issue"... Will let the pics do the talking. On a brief hold again.

that flipping sucks, check your u joints and drive shaft timing , or did it get hit , that's a bad thing right there

**too much stuff** · 04-29-2017, 09:53 PM

Quote:

Originally Posted by undertaker72

that flipping sucks, check your u joints and drive shaft timing , or did it get hit , that's a bad thing right there

No idea how it happened. Just glad we saw it before the engine went in.

El Dorado Jim · 04-29-2017, 10:03 PM

that sucks, can you get it tig welded?

**too much stuff** · 04-29-2017, 11:20 PM

I had a trans rebuilt for my 69 project. I am just going to use that. I have another good core I will have rebuilt for my 69. There is a place not too far away that say "if it can be fixed, they can do it". Regardless, it will have to come out.

**Richard** · 04-29-2017, 11:34 PM

That's the back of the transmission right? Bet there is a torque bracket on the transfer case. Broken transmission cases and adapters is why they are not used anymore. There is a thread somewhwhere on it at this site.
Here is the thread http://67-72chevytrucks.com/vboard/s...d.php?t=491001

**too much stuff** · 04-30-2017, 10:26 AM

Quote:

Originally Posted by Richard

That's the back of the transmission right? Bet there is a torque bracket on the transfer case. Broken transmission cases and adapters is why they are not used anymore. There is a thread somewhwhere on it at this site.
Here is the thread http://67-72chevytrucks.com/vboard/s...d.php?t=491001

No torque bracket, but my buddy said we should add one. Looks like that may be a bad idea?
Thanks for the link.

**too much stuff** · 04-30-2017, 08:49 PM

Update, my buddy wants to add the later model bracket from the bell housing to the transfer case like a later model. Any pros or cons to that?

Had to push it out for car trailer repair.............. I will post pics of that in GD.......

11-13-2016, 10:29 AM	#26
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: SO i bought some slots from a board member.. Here is my thread on it. It says custom bench seat. So I'm guessing that was the Cheyenne type interior? http://67-72chevytrucks.com/vboard/s...d.php?t=495037 __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

11-13-2016, 08:45 PM	#28
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: SO i bought some slots from a board member.. Oh man I sure don't remember, but I have a hard time remembering what I did yesterday lol __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

11-13-2016, 09:06 PM	#30
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: SO i bought some slots from a board member.. Was this the deal where you drove down a car and left it and drove the burb home? __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

11-13-2016, 09:08 PM	#31
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: SO i bought some slots from a board member.. That's the one. Of course we did that with the napco also.... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-13-2016, 11:15 PM	#32
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,845	Re: SO i bought some slots from a board member.. Eric, love the solid white burb, i need to get started on my 69 K20 burb again. mine only has 4" of lift but is solid white with barn doors too. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

11-19-2016, 11:42 PM	#34
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: SO i bought some slots from a board member.. On hold for a little bit now. Got the engine for it dug out and in the garage and then this happened. Hopefully it will melt some and I can do some more out door things. (about 14" of snow) Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2016, 09:49 AM	#35
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: SO i bought some slots from a board member.. Kinda takes the fun out of working on them outside, ey? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-20-2016, 07:36 PM	#37
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: SO i bought some slots from a board member.. This should move that burb around pretty good. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2016, 09:01 PM	#38
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: SO i bought some slots from a board member.. A BBBurb. That just seems right. Typing that made me feel like George Thorogood __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-29-2017, 07:54 PM	#39
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: SO i bought some slots from a board member.. So things have changed some... I parted a rusty low mile 72 K-20 that ran good. I figured the 350 4bbl would be more at home in the burb and make life easier with the install. Even close to numbers matching... Went to install the engine last weekend and ran into an "issue"... Will let the pics do the talking. On a brief hold again. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-29-2017, 10:03 PM	#42
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: SO i bought some slots from a board member.. that sucks, can you get it tig welded?

04-29-2017, 11:20 PM	#43
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: SO i bought some slots from a board member.. I had a trans rebuilt for my 69 project. I am just going to use that. I have another good core I will have rebuilt for my 69. There is a place not too far away that say "if it can be fixed, they can do it". Regardless, it will have to come out. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-29-2017, 11:34 PM	#44
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,759	Re: SO i bought some slots from a board member.. That's the back of the transmission right? Bet there is a torque bracket on the transfer case. Broken transmission cases and adapters is why they are not used anymore. There is a thread somewhwhere on it at this site. Here is the thread http://67-72chevytrucks.com/vboard/s...d.php?t=491001 __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 Last edited by Richard; 04-30-2017 at 01:47 AM. Reason: Add link

04-30-2017, 08:49 PM	#46
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: SO i bought some slots from a board member.. Update, my buddy wants to add the later model bracket from the bell housing to the transfer case like a later model. Any pros or cons to that? Had to push it out for car trailer repair.............. I will post pics of that in GD....... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.