78 downlow-littledough

[cooperhw]

Originally Posted by rusty76

So are using a stock truck arm cross member and truck arms?

Yes. I "cupped" the bottom control arm & have a plate across the stock crossmember.

[SCOTI]

Originally Posted by cooperhw

Yes. I "cupped" the bottom control arm & have a plate across the stock crossmember.

That's what you did up front. I read the question as what's going on out back.

It looks like an aftermarket POL or CPP T/A x-member & factory GM truck arms for the rear. But, it seems like your placement of the arms on the rear end will require changes @ the x-member.