|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-10-2017, 08:09 AM
|
#1 |
|
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Front brake lines are giving me fits
Ism swapping 84 calipers and rotors on my 65
I have maguaghty 2.5 dropped spindles The stock lines don't fit Anyone have a universal line they like? So busy with life it's hard to go back and forth to the parts store. Any tips would be appreciated ! |
|
|
|
05-10-2017, 11:38 AM
|
#2 |
|
Senior Member
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Front brake lines are giving me fits
You need to use the 73 and up lines and run them down the upper a arm just like the factory did it. There are holes in the frame to run them into and run new lines to those locations. The end at the spindle will need to be bent a bit to line up. I clamp the banjo fittings in a vice with soft jaws and do the bends. Just go slow and do a little and test fit.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
05-10-2017, 10:40 PM
|
#3 |
|
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Re: Front brake lines are giving me fits
Thanks jimmy!
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
