Clyde's '65 BBW "Bonnie" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RootBeerFXS · 08-01-2016, 11:01 PM

Mike here,
Curious about tire sizes with those wheels. I am looking to gain a little scrub height due to my controls arms getting hammered all of the time. I am close to the track in Sanger, I am close to Lewisville if you ever want to hit the track one evening. I am digging the truck, looks great.

bumwine · 08-01-2016, 11:18 PM

Quote:

Originally Posted by RootBeerFXS

Mike here,
Curious about tire sizes with those wheels. I am looking to gain a little scrub height due to my controls arms getting hammered all of the time. I am close to the track in Sanger, I am close to Lewisville if you ever want to hit the track one evening. I am digging the truck, looks great.

I'm running 225/55/17. The lowest spot on my lower control arm sits about
2 1/2" off the ground. We should cruise some time

RootBeerFXS · 08-05-2016, 10:53 PM

Quote:

Originally Posted by bumwine

I'm running 225/55/17. The lowest spot on my lower control arm sits about
2 1/2" off the ground. We should cruise some time

I am about the same, maybe a little more clearance now that I shaved 1/2 of my CPP arm off on a railroad track. Some good racing this weekend at Sanger and a few good shows around Dallas this weekend. Plus Cars and Coffee in Plano. I am always down for some cruising and grub. I am waiting on a response from Cragar on some wheel info.

bumwine · 08-05-2016, 11:44 PM

Quote:

Originally Posted by RootBeerFXS

I am about the same, maybe a little more clearance now that I shaved 1/2 of my CPP arm off on a railroad track. Some good racing this weekend at Sanger and a few good shows around Dallas this weekend. Plus Cars and Coffee in Plano. I am always down for some cruising and grub. I am waiting on a response from Cragar on some wheel info.

I busted a Ujoint today and my driveshaft needs to be replaced now. Discount tire is a dealer for cragar that's where I got all my info

bumwine · 10-09-2016, 09:10 AM

I haven't posted in awhile but after I dropped my drive shaft awhile back I had a new driveshaft made. That made a huge difference. I also upgraded to a new posi unit I'm still breaking it in but I can tell it's going to be fun. Went cruising the other night and took a couple decent pictures

northern 85 · 10-09-2016, 09:20 AM

Awesome pictures!!!

RootBeerFXS · 10-09-2016, 12:56 PM

Quote:

Originally Posted by bumwine

I haven't posted in awhile but after I dropped my drive shaft awhile back I had a new driveshaft made. That made a huge difference. I also upgraded to a new posi unit I'm still breaking it in but I can tell it's going to be fun. Went cruising the other night and took a couple decent pictures

Love the pics. If you dont already, you should check out the c/10 club on FB. We just met at Kellers last night and they usually have a few gtg's a month. C10s in the park was a blast with 400 c/10s and the pasture party is coming up. Its being put on by Lone Star Squares.

bumwine · 10-09-2016, 04:29 PM

Quote:

Originally Posted by RootBeerFXS

Love the pics. If you dont already, you should check out the c/10 club on FB. We just met at Kellers last night and they usually have a few gtg's a month. C10s in the park was a blast with 400 c/10s and the pasture party is coming up. Its being put on by Lone Star Squares.

I was going to go to the park meet but my rearend wasn't back together yet. I'm not on FB anymore I got tired of all the drama. Now I only have Instagram

RDrancher · 10-09-2016, 07:42 PM

That truck wears some nice character for sure. Are you going to Pistons & Paint next weekend?

bumwine · 10-09-2016, 07:48 PM

Quote:

Originally Posted by RDrancher

That truck wears some nice character for sure. Are you going to Pistons & Paint next weekend?

It's in November isn't it?

RDrancher · 10-09-2016, 08:10 PM

Quote:

Originally Posted by bumwine

It's in November isn't it?

Yeah, my bad...November 12th I believe.

bumwine · 10-09-2016, 08:15 PM

Quote:

Originally Posted by RDrancher

Yeah, my bad...November 12th I believe.

Had me worried for a minute ha ha. I plan on going but I don't know if I'm going to enter my truck or not

gringoloco · 10-10-2016, 01:02 AM

Man I like this truck

bumwine · 10-15-2016, 09:22 AM

Quote:

Originally Posted by gringoloco

Man I like this truck

Thanks! She's been eventful so far

RDrancher · 10-15-2016, 09:51 AM

Quote:

Originally Posted by bumwine

Had me worried for a minute ha ha. I plan on going but I don't know if I'm going to enter my truck or not

Yeah, sorry to raise your blood pressure lol.

Hey, I have a question on the shock relocators. Do they allow for a better angle or the stock length shocks with spring drop? As you can tell by my sig, I found the SB project I was looking for for my 14 year old...and one for me too. This old dog is going to have to learn some new tricks.

bumwine · 10-15-2016, 03:08 PM

Quote:

Originally Posted by RDrancher

Yeah, sorry to raise your blood pressure lol.

Hey, I have a question on the shock relocators. Do they allow for a better angle or the stock length shocks with spring drop? As you can tell by my sig, I found the SB project I was looking for for my 14 year old...and one for me too. This old dog is going to have to learn some new tricks.

They help keep the appropriate shock geometry

LostMy65 · 05-16-2017, 07:47 PM

I nominated you:
http://67-72chevytrucks.com/vboard/s....php?p=7944414

bumwine · 05-17-2017, 12:22 AM

Quote:

Originally Posted by LostMy65

I nominated you:
http://67-72chevytrucks.com/vboard/s....php?p=7944414

Hell yeah! Thanks

La Zona Imagery · 05-17-2017, 04:54 AM

Quote:

Originally Posted by bumwine

Hell yeah! Thanks

Hi when you get a chance can you measure the distance between the top of front fender wheel well to the ground and also the same for the rear? Trying to think of doing something similar thanks

**Clyde65** · 05-17-2017, 10:40 AM

Hey Bumwine, are you in South Ft Worth??

bumwine · 05-18-2017, 10:10 PM

Quote:

Originally Posted by La Zona Imagery

Hi when you get a chance can you measure the distance between the top of front fender wheel well to the ground and also the same for the rear? Trying to think of doing something similar thanks

So from the ground to the top of wheel well opening is 25" in the front and 23.5" in the rear

bumwine · 05-18-2017, 10:11 PM

Quote:

Originally Posted by Clyde65

Hey Bumwine, are you in South Ft Worth??

I'm in Fort Worth. Use to live in keller. Now I'm in Bedford

08-01-2016, 11:01 PM	#76
RootBeerFXS Registered User Join Date: Sep 2015 Location: the colony Posts: 102	Re: Clyde's '65 BBW "Bonnie" Mike here, Curious about tire sizes with those wheels. I am looking to gain a little scrub height due to my controls arms getting hammered all of the time. I am close to the track in Sanger, I am close to Lewisville if you ever want to hit the track one evening. I am digging the truck, looks great.

10-09-2016, 09:10 AM	#80
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I haven't posted in awhile but after I dropped my drive shaft awhile back I had a new driveshaft made. That made a huge difference. I also upgraded to a new posi unit I'm still breaking it in but I can tell it's going to be fun. Went cruising the other night and took a couple decent pictures

10-09-2016, 09:20 AM	#81
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Clyde's '65 BBW "Bonnie" Awesome pictures!!!

10-09-2016, 07:42 PM	#84
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: Clyde's '65 BBW "Bonnie" That truck wears some nice character for sure. Are you going to Pistons & Paint next weekend? __________________ Romans 10:9 - The Truth

10-10-2016, 01:02 AM	#88
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Clyde's '65 BBW "Bonnie" Man I like this truck __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-16-2017, 07:47 PM	#92
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Clyde's '65 BBW "Bonnie" I nominated you: http://67-72chevytrucks.com/vboard/s....php?p=7944414 __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-17-2017, 10:40 AM	#95
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Clyde's '65 BBW "Bonnie" Hey Bumwine, are you in South Ft Worth?? __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.