HELP bleeder kits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theo70 · 04-09-2004, 04:09 PM

Is the HELP m/c bleeder kits designed to do one reservoir at a time, or do you cut the one hose supplied in half and do both?

*60apache4* · 04-09-2004, 08:45 PM

I have a similar kit I got from NAPA; some plastic fittings, clips, and hose.

If you're "bench bleeding" a master cylinder I would do both ports at the same time. My kit came with several fittings so I put them on both ports and routed the hose back into the brake fluid to bleed the air. Hope this helps.

04-09-2004, 04:09 PM	#1
theo70 COMING SOON... Join Date: Feb 2003 Location: Ft Worth TX Posts: 408	HELP bleeder kits Is the HELP m/c bleeder kits designed to do one reservoir at a time, or do you cut the one hose supplied in half and do both?

04-09-2004, 08:45 PM	#2
60apache4 Account Suspended Join Date: Nov 2001 Location: Oregon Posts: 147	I have a similar kit I got from NAPA; some plastic fittings, clips, and hose. If you're "bench bleeding" a master cylinder I would do both ports at the same time. My kit came with several fittings so I put them on both ports and routed the hose back into the brake fluid to bleed the air. Hope this helps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.