Fleetside steel bed floor

[Warejd]

Looking to install a metal bed floor from a 67-72 model in my 64 fleetside swb. Any tips tricks or things I need to do? Any one have pics of theirs in process? Thanks in advance for the help!

[61K10]

Do a search upper right of page type in steel bed floor. some threads of this subject. good one on page 2.

[The Rocknrod]

Here is a whole thread on the subject: http://67-72chevytrucks.com/vboard/s...d.php?t=370488

[Mikecc6]

71 steel floor in 66. Only need to trim rear corners of floor. Had to cut the floor since I shortened my long bed.

[61_FL_Apache]

My 61 had 1/8 sheet steel installed. Nothing fancy, but worked well.

[Backpayne]

I installed one from a '68. As mentioned above you will only have to cut notches out on back for bedsides to go on.

[Captainfab]

Around here you can not find a '67-'72 steel bed floor that isn't beat to crap unless it is attached to excellent condition bedsides. In which case you will pay big $$$$$ for the whole bed. Especially a short bed. At that point a guy may as well buy a new aftermarket steel bed floor. Obviously this is not the case in all areas of the country.

[Mikecc6]

Picked up the steel floor at Carlisle truck show last year - $125 no rust, couple dents. May have been one of my best finds at Carlisle!