GA Parting out 1976 c10 Silverado & Cleaning Up Sale

[ghalperin]

I'm interested in the carb. Photos , model number, condition?

[SanitysBane]

Interested in the front suspension center link if you're willing to sell it.

[favor]

can ya ck shipping of original a/c fan shroud to 33993 ?thanks,Frank

[rainamy]

We pulled the cluster and got a couple better pictures. Comes with the oil sending line if desired, but will need to be bent or coiled somewhat to fit into box. Lens is clear, couple scratches, knob is unscrewed off clock post, and gauge selector needle needs cable with clip glued/reattached. Housing has the troublesome left tab intact and circuits look nice.

[rainamy]

Originally Posted by SanitysBane

Interested in the front suspension center link if you're willing to sell it.

Unfortunately, probably not going to be able to happen... got an injury stacked on an injury now, so anything that gets pulled will be by the grace of my better half, or someone local removing it themselves... and I don't see her being capable of that type of work.

[rainamy]

Originally Posted by favor

can ya ck shipping of original a/c fan shroud to 33993 ?thanks,Frank

Can do, but, I'd expect it to be next weekend before it can get pulled off and measured up for an exact number.

Based purely on size though, honestly I bet shipping is going to cost as much as the part itself because IIRC it's a one piece and doesn't break down into two halves. So let me know ahead of time if $20-25 in shipping on top of the price is more than you're interested in so we don't waste the time and effort having the lady here taking it off for ya - she's got enough slack to pick up from my injured carcass as it is

[AbramJ]

I'd like the cluster if it isn't already spoken for, how much to 85282? Is any of the other wood grain paneling left (dash and doors)?

[rainamy]

Pics of woodgrain door panel as requested

[rainamy]

Originally Posted by AbramJ

I'd like the cluster if it isn't already spoken for, how much to 85282? Is any of the other wood grain paneling left (dash and doors)?

All of the woodgrain is available as of right now, pics of the one door panel just posted, and of the dash are earlier in thread.

Nobody has said I'll take it on gauges, so I'll get you a shipping price.

[AbramJ]

Could you get shipping prices for the cluster and wood grain stuff? I'm interested in all of it.

[70K10Hunter]

I'll take the gauge cluster for $80 shipped if you throw in the wiper switch. I will pm you ship to address.

[truckdude239]

ars the seat belts still there?

[rainamy]

Originally Posted by truckdude239

ars the seat belts still there?

Have the complete set pulled, wanted to try to clean them up a bit first but would sell as-is (pretty dirty right now).

They are blue, lap belt only (was early production year non-shoulder belt truck). One of the buckle ended straps (for the middle) has a frayed spot about 18" to 24" from the end from being stuck rubing the seat frame, the clasp end of that center belt is also dirtiest from being trapped under the seat. All of the other belts show no frays and no edge wear. Two of the buckle portions are missing the blue "gm" square, the 3rd has it. The two edge belts pull in and out of retractor as they should.

All 4 anchor bolts included in case you need them. Will do $80 shipped flat rate lower 48 before I clean them, will be higher after.

[truckdude239]

Okay sorry looking for the late model shoulder belts thanks for posting though

[rainamy]

Originally Posted by AbramJ

I'd like the cluster if it isn't already spoken for, how much to 85282? Is any of the other wood grain paneling left (dash and doors)?

Originally Posted by 70K10Hunter

I'll take the gauge cluster for $80 shipped if you throw in the wiper switch. I will pm you ship to address.

AbramJ stepped in and is first to say he'll take the cluster. He has a pm waiting for him to send payment.

70K10Hunter, you're next in line based on when you said you'd take it, IF you want just the cluster for $80 shipped. Don't have a wiper switch to give you, it's cluster ONLY.

Just following board rules which have bit me in the past (and we're enforced against me.) An I'll take it goes firat...

[70K10Hunter]

status on the cluster please....

[rainamy]

Originally Posted by 70K10Hunter

status on the cluster please....

Clustet, along with all woodgrain related pieces, were sold.

[70K10Hunter]

thanks for posting that info......