97 3500 454 4x4 project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mr_Rich** · 06-19-2017, 12:41 PM

Another thing I want to add is that I found a local vendor that sells GM MetriPack and WeatherPack electrical connector kits. I bought two kits myself to cover a lot of the connectors I need to replace that are damaged in the engine bay. I had to replace the EGR plug and EGR solenoid that was melted on my truck.

mingoman · 06-19-2017, 11:32 PM

Quote:

Originally Posted by Mr_Rich

Another thing I want to add is that I found a local vendor that sells GM MetriPack and WeatherPack electrical connector kits. I bought two kits myself to cover a lot of the connectors I need to replace that are damaged in the engine bay. I had to replace the EGR plug and EGR solenoid that was melted on my truck.

Well, at least you found the connectors you need.
Glad you've enjoyed the build so far. It's not the most flashy, but I think it's going to turn out in the end.

06-19-2017, 12:41 PM	#1
Mr_Rich Registered User Join Date: May 2006 Location: Santa Maria, Calif. Posts: 781	Re: 97 3500 454 4x4 project Another thing I want to add is that I found a local vendor that sells GM MetriPack and WeatherPack electrical connector kits. I bought two kits myself to cover a lot of the connectors I need to replace that are damaged in the engine bay. I had to replace the EGR plug and EGR solenoid that was melted on my truck. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.