Looking for pics of factory exhaust hanger on a 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joesjunk** · 06-28-2017, 10:11 PM

Quote:

Originally Posted by DeadheadNM

A little bent but here's one...this is the frame rail mounted (riveted) bracket.

Would you want to sell this? Thanks

**Chevyland** · 06-28-2017, 10:32 PM

Pics are
Back looking forward
Front looking backwards
Passenger toward driver
Driver toward passenger
Sorry about the rusty tailpipe
It's not connected anymore , but I pushed it up there for the pic
I believe this is original

Edit
??
I'll try and look on some other trucks and see if I see the same

**DeadheadNM** · 06-29-2017, 07:53 AM

Quote:

Originally Posted by Joesjunk

Would you want to sell this? Thanks

Sure - how's $25 shipped (plus PP fees)? Will take me a few days before I can box and ship if that's ok. The flange that sits flush on the inner frame frail will need to be bent back to 90 degrees but I don't think that will tough. Otherwise it's a solid non-rusty piece. Pete

**HOTFUN** · 06-29-2017, 04:24 PM

Quote:

Originally Posted by DeadheadNM

Sure - how's $25 shipped (plus PP fees)? Will take me a few days before I can box and ship if that's ok. The flange that sits flush on the inner frame frail will need to be bent back to 90 degrees but I don't think that will tough. Otherwise it's a solid non-rusty piece. Pete

This one that Pete has is the standard front exhaust bracket rivited to the frame ahead of the muffler and located under the cab. Like most as mine shown here were eliminated with the hot butter knife when dual exhaust was installed.

Not to highjack but if Joe decides he doesn't need this forward single exhaust bracket, I would like to buy it for replacing my torched off one. Thanks guys, Mark

**Joesjunk** · 06-29-2017, 06:35 PM

Pete, let Mark have that bracket you have. My truck has that one on it.

Mark, what truck is that you have pictured?

**HOTFUN** · 06-29-2017, 08:23 PM

Joe, as you well know I sold 3 of my K20s 3 years ago and I could kick myself for not saving one of them to restore for my stable. First part of May I went and looked at but then somehow missed out on a 1 owner 72 K20 Cheyenne loaded with 50k miles in Lincoln that was used as a snow plow since new from Duteua Chevrolet there. That's all it took to get me back in the hunt. So I started searching again for a nice frame and I have enough NOS and another perfect body to build a nice truck. It turned out to be a very clean 72 K20 with basically a rolling frame and cab from South Dakota and interestingly it was a factory Cheyenne Super truck. So I'm back in the 72 build stages now.
I'm glad you had this bracket up front and letting me step in as I am going factory single exhaust too on this build. Mark

06-28-2017, 10:32 PM	#2
Chevyland Senior Member Join Date: Aug 2013 Location: Ca. <-> Ma. Posts: 5,786	Re: Looking for pics of factory exhaust hanger on a 4x4 Pics are Back looking forward Front looking backwards Passenger toward driver Driver toward passenger Sorry about the rusty tailpipe It's not connected anymore , but I pushed it up there for the pic I believe this is original Edit ?? I'll try and look on some other trucks and see if I see the same Attached Images Last edited by Chevyland; 06-28-2017 at 10:50 PM.

06-29-2017, 06:35 PM	#5
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,727	Re: Looking for pics of factory exhaust hanger on a 4x4 Pete, let Mark have that bracket you have. My truck has that one on it. Mark, what truck is that you have pictured? __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

06-29-2017, 08:23 PM	#6
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,154	Re: Looking for pics of factory exhaust hanger on a 4x4 Joe, as you well know I sold 3 of my K20s 3 years ago and I could kick myself for not saving one of them to restore for my stable. First part of May I went and looked at but then somehow missed out on a 1 owner 72 K20 Cheyenne loaded with 50k miles in Lincoln that was used as a snow plow since new from Duteua Chevrolet there. That's all it took to get me back in the hunt. So I started searching again for a nice frame and I have enough NOS and another perfect body to build a nice truck. It turned out to be a very clean 72 K20 with basically a rolling frame and cab from South Dakota and interestingly it was a factory Cheyenne Super truck. So I'm back in the 72 build stages now. I'm glad you had this bracket up front and letting me step in as I am going factory single exhaust too on this build. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 factory #'s V8 stepside project '72 Cheyenne K20 50k original '72 CST Blazer K5 owned 30+yrs '73 Sierra swb 4x4 '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.