Need some me ideas and pics for seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5spd540 · 07-01-2017, 06:03 PM

What has everyone used that is not a stock seat in their 67-72

**'68OrangeSunshine** · 07-01-2017, 08:07 PM

Way off the beaten path, but I have a '69 T-Bird powered Bucket back/bench seat w/ headrests in my '68 Chevy C/10.
I don't recommend anyone follow my example but it's different. I got it for $20 bucks plus my old bench seat back in '77. I've had it recovered in a saddle vinyl a couple times. Electrics work but draw 30 amps. Was nice when I had it hooked up. On long trips I could trim the seat depth and angle to ease pressure off my accelerator foot/ankle.
Drawbacks were 1] Ford electrics. 2] heavy battery draw. 3] Install required four 5/8'' seat mount holes in cab floor in unsupported locations. Now shored up with thick 2-1/2'' washers, but not before one corner punched thru the floor off-roading.

71meangreenc10 · 07-02-2017, 01:07 AM

Dodge Seats.....

http://67-72chevytrucks.com/vboard/s...d.php?t=386180

Smitty

5spd540 · 07-02-2017, 06:48 PM

I like my seats in my RAM I may look into a set or a set from a tahoe would be nice also but just don't know what will fit.

07-01-2017, 06:03 PM	#1
5spd540 Registered User Join Date: May 2013 Location: EDEN GA Posts: 191	Need some me ideas and pics for seats What has everyone used that is not a stock seat in their 67-72

07-01-2017, 08:07 PM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,517	Re: Need some me ideas and pics for seats Way off the beaten path, but I have a '69 T-Bird powered Bucket back/bench seat w/ headrests in my '68 Chevy C/10. I don't recommend anyone follow my example but it's different. I got it for $20 bucks plus my old bench seat back in '77. I've had it recovered in a saddle vinyl a couple times. Electrics work but draw 30 amps. Was nice when I had it hooked up. On long trips I could trim the seat depth and angle to ease pressure off my accelerator foot/ankle. Drawbacks were 1] Ford electrics. 2] heavy battery draw. 3] Install required four 5/8'' seat mount holes in cab floor in unsupported locations. Now shored up with thick 2-1/2'' washers, but not before one corner punched thru the floor off-roading. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

07-02-2017, 01:07 AM	#3
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Need some me ideas and pics for seats Dodge Seats..... http://67-72chevytrucks.com/vboard/s...d.php?t=386180 Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

07-02-2017, 06:48 PM	#4
5spd540 Registered User Join Date: May 2013 Location: EDEN GA Posts: 191	Re: Need some me ideas and pics for seats I like my seats in my RAM I may look into a set or a set from a tahoe would be nice also but just don't know what will fit.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.