Decided to put my 292 parts on e-bay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Canada20 · 04-07-2004, 05:08 PM

Kinda lame of me to post this but here's a couple of e-bay auctions;

3 groove pulley for power steering;
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT

Felpro Gasket set
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT

Greg

Canada20 · 04-07-2004, 05:16 PM

I also have;
- the tin (valve cover, pushrod cover and timing cover though I think I mangled that, and I can get the oil pan if anyone wants it)
-fan (doubt anyone wants that)
-intake and exhaust manifolds
-engine stands and mounts (won't have these out for awhile)
-HEI that needs rebuilt
-regular points ditributor with wires that looks like it's in pretty good shape

Greg

Canada20 · 04-08-2004, 12:18 PM

Canada20 · 04-09-2004, 11:20 AM

friday bump

Blue Beard · 04-09-2004, 10:40 PM

Just got a new rig with a 292 in it....will have to wait and see on the pulley...

MOTHERTRUCKERS · 04-09-2004, 11:12 PM

How much for the frame mounts when you get them out?

70-K10-292 · 04-10-2004, 11:02 AM

How is the heat riserspring and is there a heat stove on the manifold ?

Canada20 · 04-10-2004, 08:19 PM

MotherTruckers: is $50US + shipping on the mounts & stands too optimistic?

K10-292; not sure about the spring; I don't remember one but there might be something kicking around. There is a heat stove on the exhast manifold.

Hope this helps!

Greg

70-K10-292 · 04-10-2004, 09:33 PM

Care to sell the heat stove ?

Canada20 · 04-12-2004, 11:18 AM

Last day of auction bump

Greg

Canada20 · 04-12-2004, 08:17 PM

shameless last minute bump

(I'll quit whoring now

)

Greg

MOTHERTRUCKERS · 04-12-2004, 09:38 PM

Only need the stands,putting steel mounts in it.

04-07-2004, 05:08 PM	#1
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	Decided to put my 292 parts on e-bay Kinda lame of me to post this but here's a couple of e-bay auctions; 3 groove pulley for power steering; http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT Felpro Gasket set http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT Greg __________________ No such thing as a stupid question, right? Last edited by Canada20; 04-07-2004 at 06:38 PM.

04-07-2004, 05:16 PM	#2
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	I also have; - the tin (valve cover, pushrod cover and timing cover though I think I mangled that, and I can get the oil pan if anyone wants it) -fan (doubt anyone wants that) -intake and exhaust manifolds -engine stands and mounts (won't have these out for awhile) -HEI that needs rebuilt -regular points ditributor with wires that looks like it's in pretty good shape Greg __________________ No such thing as a stupid question, right?

04-08-2004, 12:18 PM	#3
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	__________________ No such thing as a stupid question, right?

04-09-2004, 11:20 AM	#4
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	friday bump __________________ No such thing as a stupid question, right?

04-09-2004, 10:40 PM	#5
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Just got a new rig with a 292 in it....will have to wait and see on the pulley... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-09-2004, 11:12 PM	#6
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	How much for the frame mounts when you get them out? __________________ Rest in Peace Ed. Thanks for all the good times.

04-10-2004, 11:02 AM	#7
70-K10-292 Registered User Join Date: Apr 2000 Location: Peru,NY Posts: 183	How is the heat riserspring and is there a heat stove on the manifold ? __________________ Where Am I ? How did I get Here ? 1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact .

04-10-2004, 08:19 PM	#8
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	MotherTruckers: is $50US + shipping on the mounts & stands too optimistic? K10-292; not sure about the spring; I don't remember one but there might be something kicking around. There is a heat stove on the exhast manifold. Hope this helps! Greg __________________ No such thing as a stupid question, right?

04-10-2004, 09:33 PM	#9
70-K10-292 Registered User Join Date: Apr 2000 Location: Peru,NY Posts: 183	Care to sell the heat stove ? __________________ Where Am I ? How did I get Here ? 1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact .

04-12-2004, 11:18 AM	#10
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	Last day of auction bump Greg __________________ No such thing as a stupid question, right?

04-12-2004, 08:17 PM	#11
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	shameless last minute bump (I'll quit whoring now ) Greg __________________ No such thing as a stupid question, right?

04-12-2004, 09:38 PM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Only need the stands,putting steel mounts in it. __________________ Rest in Peace Ed. Thanks for all the good times.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.