Laying Rockers on 20's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 04-12-2004, 10:25 PM

How much of a bridge in the rear frame and what set-up on the front do you use in order to set the body on the ground using 20" rims? Has anyone done it?

Glen · 04-12-2004, 10:33 PM

I think the proper way to do that would be to body drop it. Hacking the front frame/suspension up that high will ruin the geometry and you will have to cut a tunnel for the driveline thru the cab anyway to set things up properly.

Can you do it without bodydropping...yes, it will be easier in the long run and cause less problems if you channel the cab over the frame.

04-12-2004, 10:25 PM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Laying Rockers on 20's How much of a bridge in the rear frame and what set-up on the front do you use in order to set the body on the ground using 20" rims? Has anyone done it? __________________ 1972 Blazer body...need to get a thread started for the rest of the story

04-12-2004, 10:33 PM	#2
Glen Registered User Join Date: Jan 2003 Location: Chandler, AZ Posts: 189	I think the proper way to do that would be to body drop it. Hacking the front frame/suspension up that high will ruin the geometry and you will have to cut a tunnel for the driveline thru the cab anyway to set things up properly. Can you do it without bodydropping...yes, it will be easier in the long run and cause less problems if you channel the cab over the frame.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.