Mike's 50

[MIKESAD50]

Guys,
Thank you all for the suggestions.
Mongocanfly, I did double check that I have the feed to the outside connection and return on the center connection.

Joedoh, I'm running a Aeromotive 340 Stealth in tank system, to the corvette filter than off to the fuel rails which have been set up returnless, they are Holley fuel rails but that shouldnt matter.
My thinking is the pressure and volume is overwhelming the filter/regulator., I was also thinking that maybe the return being only -6 might be restricting the return flow.
I will update as soon as I having this thing purring like it should be.

Solidaxel, I have not checked the return line from the filter to the tank yet. Its on my list to check when I get some time to look further into it.