REAR Anti-sway Bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chewed 71'er · 05-03-2003, 02:23 AM

Does any vendor offer a rear anti-sway bar set-up for our trucks? Was this ever a factory option? I have a 71 half-ton, long bed with coil springs.

MOTHERTRUCKERS · 05-03-2003, 09:35 AM

We have the rear in our online catalog suspension section.

dregs454 · 05-06-2003, 12:44 AM

Where does that bad boy mount up to?
Pictures possible?

crazy4chevs · 05-06-2003, 12:53 AM

It was never a factory option.

mcmlxix · 10-10-2003, 03:34 PM

Quote:

Originally posted by dregs454
Where does that bad boy mount up to?
Pictures possible?

Mothertrucker.. What brand do you cary? How does it mount?

Anyone have pics of a Hellwig mounted on a 67-72 coil rear?

darcane · 10-10-2003, 05:10 PM

Here's a pic of the sway bar I installed several years ago:
Sway bar. Try to ignore the rust and dirt...

I don't remember what brand it is, but I got it from PST when I rebuilt my suspension.

baggedblaz · 10-10-2003, 07:45 PM

i have a new one in the box i'm looking to sell, i'm not gonna end up using it if anyone is interested let me know i'll get some pics to them...

Iron-Butt · 10-10-2003, 11:51 PM

how much shipped to 77449. can you send pics

**N2TRUX** · 10-11-2003, 12:11 AM

It was never an option on a 1/2 ton "pick-up". It was available on Suburbans, and dually's though...

MR. GOODWRENCH · 10-17-2003, 08:16 PM

Here is mine,it is an ADDCO brand.

Iron-Butt · 10-18-2003, 05:10 AM

where did you get it from?

MR. GOODWRENCH · 10-18-2003, 06:54 AM

It came from Brothers,about 2 years ago.

jcab · 10-23-2003, 11:00 PM

Someone posted about a way to adapt a camaro rear sway bar as well. Might be a cheaper option if you can find one. You can do a search to find out what year of camaro would work.

Hope this helps.

basketcase · 04-12-2004, 02:38 AM

There was a link posted on here to a site that gave the whole installation process with pics. I lost the link but I'm fairly certain it was a '88 Camaro bar and was basically a bolt on. Anyone still have the link?

Tom

MOTHERTRUCKERS · 04-12-2004, 09:44 AM

Ours are the ADDCO sway bars .

dubie · 04-12-2004, 10:18 AM

I have one to install on my 67 that came from an 82 Camaro. All you need to do is make a 1/2" spacer on each side of the mounts and it bolts right up. I haven't installed mine yet, but I found out about this swap from Low69CST. He has a step by step install documented on his website
http://www.low69cst.freeservers.com

8t5Silverado · 04-13-2004, 02:02 PM

Will an 80's Camaro sway bar bolt on to a 73-87 truck with leaf springs?

basketcase · 04-13-2004, 02:26 PM

Thanks Dubie. That's the link I was looking for.

05-03-2003, 02:23 AM	#1
chewed 71'er Registered User Join Date: Mar 2002 Location: KC, NW Missouri Posts: 144	REAR Anti-sway Bars Does any vendor offer a rear anti-sway bar set-up for our trucks? Was this ever a factory option? I have a 71 half-ton, long bed with coil springs.

05-03-2003, 09:35 AM	#2
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We have the rear in our online catalog suspension section. __________________ Rest in Peace Ed. Thanks for all the good times.

05-06-2003, 12:44 AM	#3
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	Where does that bad boy mount up to? Pictures possible? __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

05-06-2003, 12:53 AM	#4
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	It was never a factory option. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

10-10-2003, 05:10 PM	#6
darcane Registered User Join Date: Jun 2000 Location: Puyallup, WA Posts: 414	Here's a pic of the sway bar I installed several years ago: Sway bar. Try to ignore the rust and dirt... I don't remember what brand it is, but I got it from PST when I rebuilt my suspension. __________________ *Mike Lackey* '68 C10

10-10-2003, 07:45 PM	#7
baggedblaz Registered User Join Date: Jan 2002 Location: Layton,Ut Posts: 196	i have a new one in the box i'm looking to sell, i'm not gonna end up using it if anyone is interested let me know i'll get some pics to them... __________________ '82 chev swb 4dr 2wd project '72 2wd blazer LT1/4L60E "SURFSIN" bagged 20's '71 2wd blazer '95 chev 2wd Xcab swb

10-10-2003, 11:51 PM	#8
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	how much shipped to 77449. can you send pics __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

10-11-2003, 12:11 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	It was never an option on a 1/2 ton "pick-up". It was available on Suburbans, and dually's though... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-17-2003, 08:16 PM	#10
MR. GOODWRENCH Registered User Join Date: Jan 2003 Location: Maryville,TN Posts: 402	Here is mine,it is an ADDCO brand. Attached Images __________________ 68 CST SWB,full off frame restoration,72 GMC Sierra Grande SWB,72 Cheyenne 30 long wheelbase flatbed,2000 4door Chevy Dually bought new,2002 SS Camaro with 600 miles,bought it to put up,72 Monte Carlo,it was my first car,69 Impala with 50,000 miles,it was my dads,89 Dodge diseal 3/4 ton 4 wheel drive,my dad bought it new,68 Camaro RS dragcar,97 United Transporters 25 foot enclosed trailer,58 Oliver Super 77 Diseal,my grandfather bought new fully restored,55 Oliver Super 66 Diseal my uncle bought new,49 Oliver Rowcrop 88,51 Farmall H,51 Farmall Super C,81 Ford 3600,89 Ford 6610,49 Allis Chalmers WD45,81 Allis Chalmers 7060 my dad bought new,Allis Chalmers 175.

10-18-2003, 05:10 AM	#11
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	where did you get it from? __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

10-18-2003, 06:54 AM	#12
MR. GOODWRENCH Registered User Join Date: Jan 2003 Location: Maryville,TN Posts: 402	It came from Brothers,about 2 years ago. __________________ 68 CST SWB,full off frame restoration,72 GMC Sierra Grande SWB,72 Cheyenne 30 long wheelbase flatbed,2000 4door Chevy Dually bought new,2002 SS Camaro with 600 miles,bought it to put up,72 Monte Carlo,it was my first car,69 Impala with 50,000 miles,it was my dads,89 Dodge diseal 3/4 ton 4 wheel drive,my dad bought it new,68 Camaro RS dragcar,97 United Transporters 25 foot enclosed trailer,58 Oliver Super 77 Diseal,my grandfather bought new fully restored,55 Oliver Super 66 Diseal my uncle bought new,49 Oliver Rowcrop 88,51 Farmall H,51 Farmall Super C,81 Ford 3600,89 Ford 6610,49 Allis Chalmers WD45,81 Allis Chalmers 7060 my dad bought new,Allis Chalmers 175.

10-23-2003, 11:00 PM	#13
jcab I need more money.... Join Date: Aug 2003 Location: Winnipeg, Manitoba, Canada Posts: 145	Someone posted about a way to adapt a camaro rear sway bar as well. Might be a cheaper option if you can find one. You can do a search to find out what year of camaro would work. Hope this helps. __________________ Jay. '68 LWB C10 '74 Duster ("It's not Rusted out, it's been modified for weight reduction") '91 Civic '97 Saturn '88 Celica AWD turbo (R.I.P.) 273 hp Mustang Killer

04-12-2004, 02:38 AM	#14
basketcase Registered User Join Date: Oct 2001 Location: Edgerton OH USA Posts: 628	There was a link posted on here to a site that gave the whole installation process with pics. I lost the link but I'm fairly certain it was a '88 Camaro bar and was basically a bolt on. Anyone still have the link? Tom __________________ '69 swb stepside in progress. '59 Corvette lifetime project

04-12-2004, 09:44 AM	#15
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Ours are the ADDCO sway bars . __________________ Rest in Peace Ed. Thanks for all the good times.

04-12-2004, 10:18 AM	#16
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	I have one to install on my 67 that came from an 82 Camaro. All you need to do is make a 1/2" spacer on each side of the mounts and it bolts right up. I haven't installed mine yet, but I found out about this swap from Low69CST. He has a step by step install documented on his website http://www.low69cst.freeservers.com __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795



Register or Log In To remove these advertisements.

04-13-2004, 02:02 PM	#17
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Will an 80's Camaro sway bar bolt on to a 73-87 truck with leaf springs? __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

04-13-2004, 02:26 PM	#18
basketcase Registered User Join Date: Oct 2001 Location: Edgerton OH USA Posts: 628	Thanks Dubie. That's the link I was looking for. __________________ '69 swb stepside in progress. '59 Corvette lifetime project

Register or Log In To remove these advertisements.