Lowest static drop, Who has it ?

[scoot_mcgrute]

Measured the rocker on mine and it's 8" off the ground

[LVPhotos]

Originally Posted by scoot_mcgrute

Measured the rocker on mine and it's 8" off the ground

8-3/4 bumper anf cab mount 235/60/15 or park on wet grass

[Lil Loafer]

When I bought my truck the front crossmember was about 2 inches from the ground.

[Slik66]

So if you slam the truck, the front inner fender is what hits first?

How is the clearance on the rear with a 5-7" drop in rear?

[theastronaut]

Originally Posted by Slik66

So if you slam the truck, the front inner fender is what hits first?

How is the clearance on the rear with a 5-7" drop in rear?

Depends on tire size. You can run a super short tire and have the crossmember bottom out before the inner fender. It'll look silly with that short of a tire though.

I never had any rear clearance isssues at a 6-7" drop in the rear with a small pipe notch. Lower than that, the pumpkin hits the bed floor before the axle tubes hit the frame (with a notch), so at that point you'll need to raise the bed floor and do a step notch.

[rvrfoot]

There a picture of my truck post number 7 it's 5-7 drop