Project Renagade:1969 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ThePunisher67 · 08-15-2017, 03:27 PM

Well I am starting a 1969 Chevy c20. I have a 450HP 383 stroker on the way should arrive soon. This project I Suspect will take a few years With me being disabled and my Son going to college and only having time here and there.

I know I will have many questions of the Community since a lot of you are expert and I am a novice at best. The Body of the truck is in decent condition. I picked it up from a guy who had to many Projects and he became disabled last year. the Driver side has rust on the back panel because he had it striped and failed to primer it for about a year. We striped the cab inside of mostly everything and found the passenger side had some rust due to the bottom panel partly coming undone.

The guy had put all new carpet down and new dash and a new seat but failed to weld or fill like 50 wholes in the bottom of the cab there is small Cancer in the bottom. My question is do i do a cut out or use Por 15 on the bottom of the cab. I am sure I will have a lot more questions. The Bed and the cab will be pulled in a few weeks.

Here are some pictures on the cab floor. most of what you see is dirt I will post more tomorrow

ThePunisher67 · 08-17-2017, 09:10 PM

Well bought this product someone said works as good if not better then major brand rust removal. It worked great with light wire brush after it sat for a hour. prep & Etch $15 for a gallon 3 parts water 1 part this stuff wow.

https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR

https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR

https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR

**HO455** · 08-18-2017, 12:25 AM

It looks like you bought a good solid truck. Now that you have used the acid etch make sure you neutralize it before you prime and paint. Now me I like looking at rust that's why I have such a large collection. But some of the other folks around these parts will want photos from farther away showing the big picture.
Welcome aboard.

ThePunisher67 · 08-18-2017, 12:37 AM

Thanks yeah I will be posting pictures of the body this weekend. Next project after this one i need to find a 1967-1970 Camaro with the fin on the back.

**Ol Blue K20** · 08-18-2017, 09:49 AM

Looks great. But we need more pics....please

ThePunisher67 · 08-18-2017, 10:13 AM

A few pics of the inside before I started. I plan on the inside being ready for pain in 30 days since i am disable it is slow. The new engine I was just told wont be here until Monday I am not to happy about that. Anyone know a good Neutralizer for acid/etch?

https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR

Only thing new are the seats and dash but I took them out Do not know if I will sell them or keep I and thinking of Single seats with a center counsel. The engine coming out only has about 17k on it from what the paperwork the guy showed me but I want a 383 in it.

ThePunisher67 · 08-18-2017, 04:44 PM

Anyone have any pictures or Ideas to make the corners inside the cab were the fuel tank used to be look good or close them off some?

ThePunisher67 · 08-18-2017, 05:33 PM

Anyone have any Ideas what to do in the corners to make them look great I am not Afrade of metal work if anyone has pictures.

https://lh3.googleusercontent.com/HW...Q=w506-h674-no

ThePunisher67 · 08-18-2017, 08:18 PM

Here are a few pictures in the Garage of the Truck.

https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR

Not a bad looking Truck if you ask me for 1500.

ThePunisher67 · 08-20-2017, 04:15 PM

Painted my Visors and Did some work inside the truck. I also started cutting the Drip rail I hate those. I got some new parts in yesterday The 383 stroker should be here Monday or Tuesday.

Visor.
https://lh3.googleusercontent.com/oT...w=w899-h674-no
Valve covers
https://lh3.googleusercontent.com/pv...Q=w899-h674-no
Valve cover bolts
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR
Lum for Wires
https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR

You guys can see these photos if not let me know so i can figure something out thanks.

08-15-2017, 03:27 PM	#1
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Project Renagade:1969 C20 Well I am starting a 1969 Chevy c20. I have a 450HP 383 stroker on the way should arrive soon. This project I Suspect will take a few years With me being disabled and my Son going to college and only having time here and there. I know I will have many questions of the Community since a lot of you are expert and I am a novice at best. The Body of the truck is in decent condition. I picked it up from a guy who had to many Projects and he became disabled last year. the Driver side has rust on the back panel because he had it striped and failed to primer it for about a year. We striped the cab inside of mostly everything and found the passenger side had some rust due to the bottom panel partly coming undone. The guy had put all new carpet down and new dash and a new seat but failed to weld or fill like 50 wholes in the bottom of the cab there is small Cancer in the bottom. My question is do i do a cut out or use Por 15 on the bottom of the cab. I am sure I will have a lot more questions. The Bed and the cab will be pulled in a few weeks. Here are some pictures on the cab floor. most of what you see is dirt I will post more tomorrow Attached Images

08-17-2017, 09:10 PM	#2
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 Well bought this product someone said works as good if not better then major brand rust removal. It worked great with light wire brush after it sat for a hour. prep & Etch $15 for a gallon 3 parts water 1 part this stuff wow. https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR Last edited by ThePunisher67; 08-17-2017 at 10:08 PM. Reason: pictures

08-18-2017, 12:25 AM	#3
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: Project Renagade:1969 C20 It looks like you bought a good solid truck. Now that you have used the acid etch make sure you neutralize it before you prime and paint. Now me I like looking at rust that's why I have such a large collection. But some of the other folks around these parts will want photos from farther away showing the big picture. Welcome aboard. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-18-2017, 12:37 AM	#4
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 Thanks yeah I will be posting pictures of the body this weekend. Next project after this one i need to find a 1967-1970 Camaro with the fin on the back.

08-18-2017, 09:49 AM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Project Renagade:1969 C20 Looks great. But we need more pics....please __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-18-2017, 10:13 AM	#6
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 A few pics of the inside before I started. I plan on the inside being ready for pain in 30 days since i am disable it is slow. The new engine I was just told wont be here until Monday I am not to happy about that. Anyone know a good Neutralizer for acid/etch? https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR Only thing new are the seats and dash but I took them out Do not know if I will sell them or keep I and thinking of Single seats with a center counsel. The engine coming out only has about 17k on it from what the paperwork the guy showed me but I want a 383 in it. Last edited by ThePunisher67; 08-18-2017 at 10:14 AM. Reason: typing

08-18-2017, 04:44 PM	#7
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 Anyone have any pictures or Ideas to make the corners inside the cab were the fuel tank used to be look good or close them off some?

08-18-2017, 05:33 PM	#8
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 Anyone have any Ideas what to do in the corners to make them look great I am not Afrade of metal work if anyone has pictures. https://lh3.googleusercontent.com/HW...Q=w506-h674-no

08-18-2017, 08:18 PM	#9
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 Here are a few pictures in the Garage of the Truck. https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR Not a bad looking Truck if you ask me for 1500.

08-20-2017, 04:15 PM	#10
ThePunisher67 Registered User Join Date: Jul 2017 Location: Sacramento California Posts: 50	Re: Project Renagade:1969 C20 Painted my Visors and Did some work inside the truck. I also started cutting the Drip rail I hate those. I got some new parts in yesterday The 383 stroker should be here Monday or Tuesday. Visor. https://lh3.googleusercontent.com/oT...w=w899-h674-no Valve covers https://lh3.googleusercontent.com/pv...Q=w899-h674-no Valve cover bolts https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR Lum for Wires https://photos.google.com/share/AF1Q...ZKOEYtc0MySzBR You guys can see these photos if not let me know so i can figure something out thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.