Help on LS 3 power steering hook up

[Russ.W.]

Originally Posted by flipper58

Looks like this might solve my issue: https://www.summitracing.com/parts/fla-fr1634

Anyone ever use this Flaming River fitting?

I used one made by Earls, and it's about $15 cheaper than that FR offering. Made for the same reason. Clearing the PS pulley on an LS swap.

https://www.summitracing.com/int/par...1erl/overview/

[homemade87]

I did what you are trying to do . What I did order a hose for a 04 corvette and removed the end that went to the pump and had it crimped onto the hose for the pump . The corvette hose has a long piece that drops down below the pulley with a nut on it to tighten . I did this long before there was aftermarket parts available . Looks like the piece from summit will do the same thing and work fine .

I do like the flaming river one better . It has a place for a wrench when tightening up and loosening the AN nut as well as install and removal of the fitting .

[flipper58]

Thanks guys. Time for a Summit order online, which now seems to be about a weekly event.
Phil