|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-11-2017, 12:37 AM
|
#1 |
|
Junior Member
Join Date: Jul 2006
Location: Delran, NJ
Posts: 458
|
Is there a left and a right for valve covers?
Are these on the wrong side? Does it matter?
|
|
|
|
09-11-2017, 12:45 AM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,628
|
Re: Is there a left and a right for valve covers?
Doesn't really matter. Easier to get oil into it rather than reaching over and around the brake booster
|
|
|
|
|
09-11-2017, 05:00 PM
|
#3 |
|
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,504
|
Re: Is there a left and a right for valve covers?
On the small block V8s, they were designed to be non-directional, left/right, front/back -- doesn't matter as long as Oil Cap and PCV are in good locations. After market SBC valve covers, you'd want the MICKEY THOMPSON [for example] in an orientation to be read.
On the BBCs, there is a definite slant, so the high side is inboard, but I think the left cover could be moved to the right, and vice versa. On the L6s, [292, 250, 230] there is a definite front and back, and 3 screws on one side and 4 on the other.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
|
|
|
09-11-2017, 05:03 PM
|
#4 |
|
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: Is there a left and a right for valve covers?
Generally oil fill would go on the same side as the dipstick. So on a small block, oil fill should be on the driver's side, and vice versa on a big block.
I've used a similar trick to spot a lot of fake big block cars... hood light should be on the oil fill side.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
