![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
![]() Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 324
|
Re: 1966 C1434 SWB Custom Cab
Number 8 piston was the one giving me trouble. But I found that the top ring gland on #3 had some damage from pre detonation or heat and the top ring was broken in three places. The engine has always had a weird noise on the rotating assembly. Maybe this was it
__________________
My current 66 ![]() My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2012
Location: Leander, TX
Posts: 969
|
Re: 1966 C1434 SWB Custom Cab
Did you pull the short block out already?
Bret
__________________
64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955 |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 324
|
Re: 1966 C1434 SWB Custom Cab
Not yet but getting close. Gonna drop the tranny first slide it out then work on removing the block. I do not have an engine hoist so it'll have to come out the bottom.
__________________
My current 66 ![]() My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 324
|
Re: 1966 C1434 SWB Custom Cab
Attachment 1696118The whole front end is off hopefully will be able to stick the LS in place and finish the motor mounts.
__________________
My current 66 ![]() My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 324
|
![]()
So I set it in there and now it's a matter of figuring out the engine placement fore and aft so that I can drill the holes for the motor mounts. TO BE CONTINUED
__________________
My current 66 ![]() My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
![]() |
![]() |
![]() |
Bookmarks |
|
|