CA WTB-65 under dash harness

[Short 3/4]

Looking for complete instrument and under dash harness in good shape for 65 with idiot lights (no radio or lighter wire needed). Needs to include fuse box. Thanks, Tom

[LostMy65]

Originally Posted by Short 3/4

Looking for complete instrument and under dash harness in good shape for 65 with idiot lights (no radio or lighter wire needed). Needs to include fuse box. Thanks, Tom

Were you looking for used? Because Classic Parts of America sells the new original harnesses with fuse block.

[LostMy65]

http://www.classicparts.com/1964-65-...tinfo/52-327/#

[Short 3/4]

Thanks , but ya I was hoping for used to keep the cost down. Anybody out there switch to a gauge dash and have the old idiot light wires? I have the gauge harness but am using the light dash

[LostMy65]

Originally Posted by Short 3/4

Thanks , but ya I was hoping for used to keep the cost down. Anybody out there switch to a gauge dash and have the old idiot light wires? I have the gauge harness but am using the light dash

I'm sorry if I'm not helping with my suggestions, I just figured if you didn't know. Just in case....

[Short 3/4]

Originally Posted by LostMy65

I'm sorry if I'm not helping with my suggestions, I just figured if you didn't know. Just in case....

Appreciate the info as prices are better than where I had been getting new electrical stuff. Thought used would be a cheap easy way to get this thing on the road for now, but not having much luck, so thanks again- Tom

[rvrfoot]

Keep looking someone will have one it just takes time.

[LostMy65]

Originally Posted by Short 3/4

Appreciate the info as prices are better than where I had been getting new electrical stuff. Thought used would be a cheap easy way to get this thing on the road for now, but not having much luck, so thanks again- Tom

There's a thread on converting gauges to lights or visa-versa.

[kerber63]

If Chevy and GMC used the same cluster bulkhead, I have a complete interior harness including fuse panel from a '64-'65 GMC. I've got a '63, so I'm not familiar with interchanges between 4-5-6.

[Short 3/4]

Originally Posted by LostMy65

There's a thread on converting gauges to lights or visa-versa.

Sorry did not see your post sooner, was out of town. Tried to find info on conversions but all seem to be lites to gauges, as most normal people would do, but of course I want to do the opposite. Do you happen to have more info? Thanks, Tom

[Short 3/4]

Originally Posted by kerber63

If Chevy and GMC used the same cluster bulkhead, I have a complete interior harness including fuse panel from a '64-'65 GMC. I've got a '63, so I'm not familiar with interchanges between 4-5-6.

I am also not sure of interchange between Chevy and GMC. Don't remember seeing any GMC's with idiot lights, but will look into it. Anybody else out there know? Thanks for the offer, I'll let you. Thanks, Tom

[LostMy65]

This guy might be able to help you out.
http://www.aspenautoaz.com

[Short 3/4]

Originally Posted by LostMy65

This guy might be able to help you out.
http://www.aspenautoaz.com

Thanks for the tip, Tom

[Short 3/4]

Originally Posted by kerber63

If Chevy and GMC used the same cluster bulkhead, I have a complete interior harness including fuse panel from a '64-'65 GMC. I've got a '63, so I'm not familiar with interchanges between 4-5-6.

Found out Chevy and GMC not the same. Thanks anyway, Tom