Is my way of thinking correct

[BossHogg69]

Originally Posted by Speedracer39

Bosshogg thanks bringing the bed alignment to my attention. I just put the box back on with 4 bolts and used a rubber for a cushion between the frame and bed I’m going to take a look at this before I start swapping springs.

I had the same issue - the rear of my bed was kicked up when I used the little square rubber isolators, so I ended up using them in the front mounts near the cab and taking them out of the mounts towards the rear of the truck and it evened things out.

Don't forget to post the before & after pics if you order new springs!