|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
10-11-2017, 11:03 PM
|
#5 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,255
|
Re: 81-86 roll cage pictures and questions!
Leave the tubes that go thru the floor long until you know where the outriggers will be. Then trim the tubes to the correct length to sit on top of the outriggers.
Only tack your outriggers in place until you have your entire cage tacked together. Then remove the outriggers and drop the cage down so that you can weld the tops of all the tubes up against the roof. Raise the cage back up and install the outriggers for good, set the cage on them and weld out the rest of the cage.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
| Bookmarks |
|
|
Threaded Mode