OH 67 tach dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**atog** · 09-25-2017, 09:53 AM

PRICE LOWERED DUE TO WRONG BEZEL Original tach dash out of 67 cst Shortbed. All gauges and components work as they should This is an untouched dash as far as I can telll All screw holes are clean and uncracked in bezel, original paint and undamaged circuit board also. There is one scratch that you can feel with fingernail as shown on left lower side of bezel, but it is not cracked Also blemish on right upper and lower outside corners as seen in pictures. Tach area is faded but is the original v8 tach $300 plus shipping First "I'll take it " is the new owner.

**atog** · 09-25-2017, 09:56 AM

More

**atog** · 09-25-2017, 09:58 AM

1111

**atog** · 09-25-2017, 10:03 AM

Last

nds1968 · 09-25-2017, 10:25 AM

That is a bezel from a big truck (C50)?

**atog** · 09-25-2017, 10:33 AM

That may be. I did not realize that. I did change it. The other was cracked ,but I have another one though. Will post pics of other Thanks for the info

**atog** · 09-25-2017, 11:10 AM

Pic of other bezel

darkhorse970 · 09-25-2017, 12:14 PM

Quote:

Originally Posted by nds1968

That is a bezel from a big truck (C50)?

How can you tell? What’s the difference?

AASmedic · 09-25-2017, 12:40 PM

Quote:

Originally Posted by darkhorse970

How can you tell? What’s the difference?

The difference is in the cut out for the steering column. In trucks C/K 10-30 The opening is cut out all the way up in the arch where in the big trucks they are only partially cut out because of the angle of the column.

**atog** · 09-25-2017, 05:54 PM

Ttt

**LockDoc** · 09-25-2017, 10:54 PM

-
Bump..... All you have to do is cut the column area out to the upper line to make it work.

LockDoc

54Caddy · 09-25-2017, 11:40 PM

I’d be interested in that wrong bezel

**atog** · 09-26-2017, 01:35 AM

I'm gonna hold on to it for now and see what the tach does

**atog** · 09-26-2017, 11:19 AM

Ttt

jaybatta · 09-26-2017, 12:05 PM

If it's from a medium duty truck it might also have a different fuel gauge. The red dummy lights will say tandem lock and axle overspeed or something like that.

**atog** · 09-26-2017, 01:36 PM

This is not out of a medium duty!!! Just the bezel was This came out of a 67 Shortbed.

jaybatta · 09-26-2017, 01:38 PM

Quote:

Originally Posted by atog

This is not out of a medium duty!!! Just the bezel was This came out of a 57 Shortbed.

Dang, ok just throwin in my .02

**atog** · 09-26-2017, 01:43 PM

You are correct though I have some the original speedo from the bezel that is a n this one and it does say tandems locked and overspeed limit or something to that extent

**atog** · 09-27-2017, 04:44 PM

Ttt

**atog** · 10-15-2017, 08:10 PM

Ttt

**atog** · 10-17-2017, 07:56 PM

Bump

**Curtb1971** · 10-17-2017, 08:16 PM

Alright, going to throw an offer out there. I'd take it if you would do $275 shipped and I'll cover the paypal fees. I don't need need the bezel that 54 caddy wants. Let me know what you think. Thanks, Curt

54Caddy · 10-17-2017, 08:35 PM

Sounds good let me know atog

**atog** · 10-18-2017, 02:55 PM

Quote:

Originally Posted by Curtb1971

Alright, going to throw an offer out there. I'd take it if you would do $275 shipped and I'll cover the paypal fees. I don't need need the bezel that 54 caddy wants. Let me know what you think. Thanks, Curt

I could do $300 shipped complete and you can send 54 caddy the bezel as shipping cost would be considerably cheaper for you to send than me sending across the states

**Curtb1971** · 10-18-2017, 04:26 PM

Cool, I know the tach face is not the prettiest but as long as it works and the other gauge faces are nice you have yourself a deal. Send over you paypal and I'll square up. Thanks, Curt

09-25-2017, 09:53 AM	#1
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	67 tach dash PRICE LOWERED DUE TO WRONG BEZEL Original tach dash out of 67 cst Shortbed. All gauges and components work as they should This is an untouched dash as far as I can telll All screw holes are clean and uncracked in bezel, original paint and undamaged circuit board also. There is one scratch that you can feel with fingernail as shown on left lower side of bezel, but it is not cracked Also blemish on right upper and lower outside corners as seen in pictures. Tach area is faded but is the original v8 tach $300 plus shipping First "I'll take it " is the new owner. Attached Images Last edited by atog; 10-15-2017 at 08:07 PM. Reason: Lowered from 400 to 350

09-25-2017, 09:56 AM	#2
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash More Attached Images

09-25-2017, 09:58 AM	#3
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash 1111 Attached Images

09-25-2017, 10:03 AM	#4
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Last Attached Images

09-25-2017, 10:25 AM	#5
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: 67 tach dash That is a bezel from a big truck (C50)? __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

09-25-2017, 10:33 AM	#6
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash That may be. I did not realize that. I did change it. The other was cracked ,but I have another one though. Will post pics of other Thanks for the info

09-25-2017, 11:10 AM	#7
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Pic of other bezel Attached Images

09-25-2017, 05:54 PM	#10
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Ttt

09-25-2017, 10:54 PM	#11
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: 67 tach dash - Bump..... All you have to do is cut the column area out to the upper line to make it work. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

09-25-2017, 11:40 PM	#12
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: 67 tach dash I’d be interested in that wrong bezel __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

09-26-2017, 01:35 AM	#13
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash I'm gonna hold on to it for now and see what the tach does

09-26-2017, 11:19 AM	#14
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Ttt

09-26-2017, 12:05 PM	#15
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 838	Re: 67 tach dash If it's from a medium duty truck it might also have a different fuel gauge. The red dummy lights will say tandem lock and axle overspeed or something like that. __________________ Joe 1968 K20 1970 K20 Semper Fi

09-26-2017, 01:36 PM	#16
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash This is not out of a medium duty!!! Just the bezel was This came out of a 67 Shortbed.

09-26-2017, 01:43 PM	#18
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash You are correct though I have some the original speedo from the bezel that is a n this one and it does say tandems locked and overspeed limit or something to that extent



Register or Log In To remove these advertisements.

09-27-2017, 04:44 PM	#19
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Ttt

10-15-2017, 08:10 PM	#20
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Ttt

10-17-2017, 07:56 PM	#21
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: 67 tach dash Bump

10-17-2017, 08:16 PM	#22
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: 67 tach dash Alright, going to throw an offer out there. I'd take it if you would do $275 shipped and I'll cover the paypal fees. I don't need need the bezel that 54 caddy wants. Let me know what you think. Thanks, Curt __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

10-17-2017, 08:35 PM	#23
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: 67 tach dash Sounds good let me know atog __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

10-18-2017, 04:26 PM	#25
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: 67 tach dash Cool, I know the tach face is not the prettiest but as long as it works and the other gauge faces are nice you have yourself a deal. Send over you paypal and I'll square up. Thanks, Curt __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

Register or Log In To remove these advertisements.