Corvette (Ls6/bat wing) oil pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLK2K2SILVY · 06-21-2012, 01:24 PM

Has anyone run one of these in a C10? I can pick up one for pretty cheap, but not sure how well it will clear the crossmember. I'm sectioning 2" out of the xmember and can notch it slightly, but Im wondering how the fitment might be around the frame and fbody headers. If it wont go I'll just go with a fbody pan.

ls1nova71 · 06-21-2012, 01:50 PM

Those pans are cheap for a reason, they almost never fit anything but a corvette. F body pan is generally more user friendly.
Posted via Mobile Device

1955 mancave · 06-21-2012, 01:51 PM

the bat wing pan is one of the ones needed on most conversions, the other ones that i see that people want are the pans that come on the trucks, i wish i could tell you about the clearence but i cant, you might check on ls forum they have alot of great info there for just about any kind of swap.

gringoloco · 06-21-2012, 03:08 PM

Rumor is it will hit the lower control arms...

clinebarger · 06-21-2012, 08:08 PM

You can make a Vette pan work, The engine/trans has to be moved up. I put a 5.3 in a lowered 71 C10 back in 02 & used a Vette pan, The oil drain points right at the cross member, It holds 7 quarts of oil....Makes oil changes interesting & expensive.

If I had to do it over I would use this http://www.summitracing.com/parts/NA...2593/?rtype=10 Comes with a pick-up tube, windage tray, dipstick & tube, & bolts.....New GM stuff for $150!

BLK2K2SILVY · 06-22-2012, 09:47 AM

Quote:

Originally Posted by gringoloco

Rumor is it will hit the lower control arms...

Thats kinda what I was thinking. Im moving my lowers forward 3/4"-1" so it might clear.

Quote:

Originally Posted by clinebarger

You can make a Vette pan work, The engine/trans has to be moved up. I put a 5.3 in a lowered 71 C10 back in 02 & used a Vette pan, The oil drain points right at the cross member, It holds 7 quarts of oil....Makes oil changes interesting & expensive.

If I had to do it over I would use this http://www.summitracing.com/parts/NA...2593/?rtype=10 Comes with a pick-up tube, windage tray, dipstick & tube, & bolts.....New GM stuff for $150!

I think with my measurements the lh8 pan will hang down approximately 1" below a 1.5" sectioned crossmember. A ctsv pan would be right around even and the fbody pan will give you .5" of spare room.... all with dirty dingo mounts. Ill probably just go for the fbody pan, but a complete batwing pan with pickup tube and all for $50 is hard to pass by!

GIZZ · 10-21-2017, 12:25 AM

ttt for this one, not much info and I can't find any pics of a batwing pan in a c10 anywhere.

Anybody else try the vette batwing with 87+ dirty dingo slider mounts in a 67-72?

I don't have the pan but if fits I can get one cheap.

06-21-2012, 01:24 PM	#1
BLK2K2SILVY Registered User Join Date: Jul 2009 Location: Bartlett, TN Posts: 88	Corvette (Ls6/bat wing) oil pan Has anyone run one of these in a C10? I can pick up one for pretty cheap, but not sure how well it will clear the crossmember. I'm sectioning 2" out of the xmember and can notch it slightly, but Im wondering how the fitment might be around the frame and fbody headers. If it wont go I'll just go with a fbody pan.

06-21-2012, 01:50 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Corvette (Ls6/bat wing) oil pan Those pans are cheap for a reason, they almost never fit anything but a corvette. F body pan is generally more user friendly. Posted via Mobile Device __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

06-21-2012, 01:51 PM	#3
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: Corvette (Ls6/bat wing) oil pan the bat wing pan is one of the ones needed on most conversions, the other ones that i see that people want are the pans that come on the trucks, i wish i could tell you about the clearence but i cant, you might check on ls forum they have alot of great info there for just about any kind of swap.

06-21-2012, 03:08 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Corvette (Ls6/bat wing) oil pan Rumor is it will hit the lower control arms... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-21-2012, 08:08 PM	#5
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Corvette (Ls6/bat wing) oil pan You can make a Vette pan work, The engine/trans has to be moved up. I put a 5.3 in a lowered 71 C10 back in 02 & used a Vette pan, The oil drain points right at the cross member, It holds 7 quarts of oil....Makes oil changes interesting & expensive. If I had to do it over I would use this http://www.summitracing.com/parts/NA...2593/?rtype=10 Comes with a pick-up tube, windage tray, dipstick & tube, & bolts.....New GM stuff for $150!

10-21-2017, 12:25 AM	#7
GIZZ Registered User Join Date: Jun 2005 Location: Vancouver Posts: 111	Re: Corvette (Ls6/bat wing) oil pan ttt for this one, not much info and I can't find any pics of a batwing pan in a c10 anywhere. Anybody else try the vette batwing with 87+ dirty dingo slider mounts in a 67-72? I don't have the pan but if fits I can get one cheap. __________________ GIZZmotorsports on YouTube & my panel truck build '69 c10 panel, '75 c35 flatdeck car hauler



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.