Anyone reproducing these?

[Chevystep]

Frame wire clips taking the main light wiring to the back, checked classic parts, LMC and classic industries...no luck yet. Might not be using the proper search words, wire clip?, frame wire clip? wire harness clips? I can always cobble something together to take that flat taillight wiring back there, just figured if it’s out there, and the originals were mangled by PO...

[ACK]

Here's clips for '67-'72 Chevy trucks, very close in appearance ... http://www.manestruckparts.com/store...&Category_ID=8. I haven't purchased them, so can't give a thumbs up or thumbs down on them.

[Chevystep]

Yup, saw those, looks like the wire install goes first then pushed into frame....I'll hold out hope that originals may be out there...

[ACK]

Originally Posted by Chevystep

Yup, saw those, looks like the wire install goes first then pushed into frame....I'll hold out hope that originals may be out there...

I thought the exact same thing when I saw them, but I think it might be an optical illusion. If you get no leads, maybe hop over to the '67-'72 section and see what they say. Also, could see if someone parting a '60-'66 truck can pull them for ya'. I just finished painting my frame and was surprised at how well the clips held up compared to the frame itself. Good luck with the search and please post an update if you find the right ones.

[CRUZN66]

Originally Posted by Chevystep

Frame wire clips taking the main light wiring to the back, checked classic parts, LMC and classic industries...no luck yet. Might not be using the proper search words, wire clip?, frame wire clip? wire harness clips? I can always cobble something together to take that flat taillight wiring back there, just figured if it’s out there, and the originals were mangled by PO...

Here they are however looks like out of stock at this time, however might contact them to get an ETA.

https://www.classicparts.com/1947-72...info/52%2D905/

[65chevysub]

can you show roughly where the clips go? I have all the wiring on my 65 Suburban tied to the frame with zipties.
Thanks

[ACK]

From my collection of photos to help put my bed back together, placement for 5 clips on a SWB C10. Hope this is useful.

[RaXaR117]

http://www.brotherstrucks.com/47-87-...tinfo/HCS72CL/

10 for $10.

Hope this helps.

[aotte1]

Maybe "Inline tube" sells them too, they have lots of fasteners.

ACK thanks for your photos.

Les

[padresag]

you may find them in here,
http://auveco.com/download/catalog/auveco_catalog.pdf
ron