IL WTB 15" X 8" 6 Lug 4 Nub Wheels Pair or Set

[62cdan]

Looking for a pair of these.
Will buy a set if that's what is available..
Thanks for the help.
-Mike

[Abe31968]

David holder rustbelt restoration

[DaHos]

Thanks Abe, but they have sold........

[62cdan]

Thanks anyway, fellas.
-Mike

[ratskin]

I have a set of rally wheels, if those would work. Think I have a couple extras too. In Galesburg.

[62cdan]

Thanks for the offer, but I need the wheels that will take a hubcap.
I have a set on the '64, and I want to run them on the '72 K10, but I only have a pair left.
-Mike

[62cdan]

ttt

[62cdan]

ttt

[Ironhorse]

Have a full set of four, 15x8, 6 lug, 4 nub wheels that are in storage. Be next weekend most likely before I can get to them. Light rust scale on them, no deep pits or rust that I recall. Need blast and clean, paint or powder coat to look good. Couple rims need some attention to the rim edges. Have not had them spun bare for a balance check. Wife is scheduled for surgery Weds this week, doubt I can get them out of the storage before next weekend. If I get a chance to do so before then I will post some pics. $400 plus shipping for the set of four, won't break them up. Don't do Paypal, money order payment only. Let me know if interested and I will try and get to the shed this week sometime. Possibly before the scheduled surgery but most likely not until next weekend.

WHEELS SOLD pending payment.

[Ironhorse]

PAYMENT RECEIVED, WHEELS SHIPPED UPS Tracking info sent, thanks for the purchase.

[CG]

Care to share how you shipped them ... boxed, or just label stuck on wheel? Ive seen both ways. My guess is about 30 bucks per wheel?

[Ironhorse]

Originally Posted by CG

Care to share how you shipped them ... boxed, or just label stuck on wheel? Ive seen both ways. My guess is about 30 bucks per wheel?

Our local UPS shipper, a local business not an actual UPS store, will NOT accept anything that is not wrapped, boxed, protected with cardboard, etc. Pretty sure that is a UPS rule/reg, the lady at the counter mentioned UPS not wanting drivers or other packages cut by un-protected items.

Being the wheels are 15'' I went to our local Menard's big box and we have everything you want store, and purchased three 16'' x 16'' x 15'' heavy duty cardboard boxes. Placed one wheel on the bottom of one box, layer of card board on top of that wheel and then placed the second wheel on top of it. Cut and folded the first box to match the height of the top of the second wheel and taped them shut. Cut in half the single odd 3rd box I purchased and slipped it over the first box and then taped it shut. Wrapped tape all around the joined section completely. Taped any seamed edges using packing tape. Marked each box as "1 of 2" and "2 of 2" , UPS made a label for each box of wheels with separate tracking #. Insured each box for $200, $100 per wheel. When shipping two or more wheels I've found it is easier and a bit less $ to ship two wheels together in one single box rather than 4 separate boxes. Total shipping, insured for $400 total value, was $86.

Sorry for the long posting but that's how I did it. Others may choose a alternate method such as Fastenal 3rd Party freight but I don't have a Fastenal or a bus line close here in Podunk, USA.

[CG]

Excellent post. I really appreciate the info, thanks!