1969 stepper wheel fitment - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68basket · 11-10-2017, 08:06 AM

So i have a 1969 c10 stepper.
Looking to do 20" wheels and need help with backspacing as i know the rear on the steps are tight.

wheels will be 20x8.5 in either 5.5bs or 4.75bs

WHich one is going to work out best? front and rear.

Mike C · 11-10-2017, 09:31 AM

I converted my truck to 5 lug using wider 71/72 axle. I have 17x9 rear wheels with 5” bs (zero offset). I’m running 275 55 17 tires. I have about 1” clearance to bedside.

With your narrower axle you will want the 4.5” bs. But I’d spend a LOT of time searching posts and using a tape measure before dropping your $$$$.

And I’ve got to get my don’t do 20’s jab in. 17/18 the sweet spot for these trucks IMO.

11-10-2017, 08:06 AM	#1
68basket Registered User Join Date: Dec 2012 Location: louisville, ky Posts: 480	1969 stepper wheel fitment So i have a 1969 c10 stepper. Looking to do 20" wheels and need help with backspacing as i know the rear on the steps are tight. wheels will be 20x8.5 in either 5.5bs or 4.75bs WHich one is going to work out best? front and rear.

11-10-2017, 09:31 AM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	Re: 1969 stepper wheel fitment I converted my truck to 5 lug using wider 71/72 axle. I have 17x9 rear wheels with 5” bs (zero offset). I’m running 275 55 17 tires. I have about 1” clearance to bedside. With your narrower axle you will want the 4.5” bs. But I’d spend a LOT of time searching posts and using a tape measure before dropping your $$$$. And I’ve got to get my don’t do 20’s jab in. 17/18 the sweet spot for these trucks IMO. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.