1966 SWB Beginner Bag Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LVPhotos · 11-12-2017, 12:41 PM

The lower you go the more the axle gets into the arc. This puts the tire into the fender at forward edge. My arms are about 1" longer than stock, and adjustable. My trailing arm mounts are not moveable with the x frame. Best bet, hang arms and cycle to see how much movement is in the arms. You will see a push fwd as the truck goes lower

dawsonthompson · 11-12-2017, 12:58 PM

Quote:

Originally Posted by LVPhotos

The lower you go the more the axle gets into the arc. This puts the tire into the fender at forward edge. My arms are about 1" longer than stock, and adjustable. My trailing arm mounts are not moveable with the x frame. Best bet, hang arms and cycle to see how much movement is in the arms. You will see a push fwd as the truck goes lower

See a push forward as in the axle going off center correct?

11-12-2017, 12:41 PM	#1
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 1966 SWB Beginner Bag Build The lower you go the more the axle gets into the arc. This puts the tire into the fender at forward edge. My arms are about 1" longer than stock, and adjustable. My trailing arm mounts are not moveable with the x frame. Best bet, hang arms and cycle to see how much movement is in the arms. You will see a push fwd as the truck goes lower __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.