MO 4x4 Front Driveshafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 11-07-2017, 03:08 AM

Two very nice double Cardan front driveshafts top shaft came out of a 72 and bottom flange style came out of an 84. 65.00 each plus shipping

Undone · 11-07-2017, 05:07 AM

Length from center to center of u-joint with slip joint compressed on shaft from the 84.

BLAZERMAN · 11-07-2017, 04:40 PM

Quote:

Originally Posted by Undone

Length from center to center of u-joint with slip joint compressed on shaft from the 84.

From center of u joint to face of flange is 25-3/4" compressed and 28-3/4" extendid.

BLAZERMAN · 11-13-2017, 02:31 AM

TTT
Top shaft is original 72 and tight, no slop.
Bottom shaft was custom made by a locol heavy truck shop and is all new Spicer parts, ran in a truck for about 2 years.

**Jcfcamaro** · 11-13-2017, 02:41 AM

Would you do 50.00 on the 72 shaft?

BLAZERMAN · 11-13-2017, 04:31 PM

Quote:

Originally Posted by Jcfcamaro

Would you do 50.00 on the 72 shaft?

Yes I can do that, were you wanting it shipped or picking it up?

**Jcfcamaro** · 11-13-2017, 04:33 PM

I'm not sure, but I definitely want it. Might be coming down to st joe Saturday.

BLAZERMAN · 11-14-2017, 02:10 AM

Quote:

Originally Posted by Jcfcamaro

I'm not sure, but I definitely want it. Might be coming down to st joe Saturday.

Sounds good, just let me know.

11-07-2017, 03:08 AM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	4x4 Front Driveshafts Two very nice double Cardan front driveshafts top shaft came out of a 72 and bottom flange style came out of an 84. 65.00 each plus shipping Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-07-2017, 05:07 AM	#2
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: 4x4 Front Driveshafts Length from center to center of u-joint with slip joint compressed on shaft from the 84.

11-13-2017, 02:31 AM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: 4x4 Front Driveshafts TTT Top shaft is original 72 and tight, no slop. Bottom shaft was custom made by a locol heavy truck shop and is all new Spicer parts, ran in a truck for about 2 years. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-13-2017, 02:41 AM	#5
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,051	Re: 4x4 Front Driveshafts Would you do 50.00 on the 72 shaft?

11-13-2017, 04:33 PM	#7
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,051	Re: 4x4 Front Driveshafts I'm not sure, but I definitely want it. Might be coming down to st joe Saturday.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.