Who's going to Dust Off? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 04-08-2004, 09:30 AM

There is a thread started in the Borad Meets forum about the Dust Off show. Anyone going?

Look here for details

Jonboy · 04-08-2004, 09:51 AM

I am planning to go out there to see ya'll and your truck in person, Ken.

low 84 · 04-08-2004, 11:01 AM

i've got to many tests before and after that weekend to make it

**N2TRUX** · 04-08-2004, 11:10 AM

Quote:

Originally posted by Jonboy
I am planning to go out there to see ya'll and your truck in person, Ken.

Double check when it gets closer. I know I will be there (or my truck will) on Saturday. I may go to Super Chevy on Sunday since it would put me closer to home.

SCOTI · 04-08-2004, 01:16 PM

I'll prob drag my turd out there Saturday & will prob do SC on Sunday as well.

Jonboy · 04-08-2004, 01:28 PM

I will just go out to look on Saturday. I don't have much that is really interesting right now. How big is the dust off usually?

kevhill85 · 04-08-2004, 03:42 PM

i'll be there .

SCOTI · 04-08-2004, 03:48 PM

Couple hundred vehicles (+ or -).

Izzy · 04-08-2004, 08:34 PM

We'll be there again this year but earlier so we can have a better spot.

**N2TRUX** · 04-09-2004, 09:40 AM

Quote:

Originally posted by fiveeightchevy
We'll be there again this year but earlier so we can have a better spot.

Y'all going to try to get there at the crack of noon this year?:p

Jonboy- It's a good show, but not that big. I'm not sure why it hasn't grown, because everyone that goes likes it. The main reason I'm going is to pick my truck up....

Jonboy · 04-09-2004, 09:47 AM

Going over there gives me a good excuse to get out of the house. I figured if it wasn't huge, I will probably bring my dog, too. She is getting old, so too much walking, and I end up carrying her.

Ken, I still have your cell number. I will try to call on Saturday. I figure it would be just as easy to follow the crowd, I am sure there will be one around your truck!

**N2TRUX** · 04-09-2004, 10:27 AM

Quote:

Originally posted by Jonboy
..... I will probably bring my dog, too......I figure it would be just as easy to follow the crowd, I am sure there will be one around your truck!

Yeah it's at a park with a small lake in the center. The dog would probably love it.

My guess is if Jason Hill shows up again that's where the crowds will be....

**N2TRUX** · 04-19-2004, 12:53 PM

It's this weekend guys. Who's still in?

Jonboy · 04-19-2004, 02:14 PM

I am still in.

twoodson · 04-19-2004, 02:47 PM

Jon I am going to get by the body shop this week to meet you for sure. I may try and make the show as well but it will be after 12pm because I am the head coach of my 6yr old son's flag football team (DeSoto Wildcats) this year and they are having a car wash on Saturday but I only have to be there half a day. I checked their site and it looks pretty nice. I know Ken will have a crowd as well as Jason Hill.. I call you Jon before I come buy. Too much going on this weekend: Super Chevy, XposedVision Dust Off, & Car Washes...

kevhill85 · 04-19-2004, 04:41 PM

i'll be there with my blazer and truck

Izzy · 04-19-2004, 06:26 PM

Quote:

Originally posted by N2TRUX
It's this weekend guys. Who's still in?

About 8 or 10 FSC members are still going. We're gonna try and get there by 730-8 at the latest.

SCOTI · 04-19-2004, 06:35 PM

I'll be there if I can get my 74 to start. . . . ....

**N2TRUX** · 04-19-2004, 08:28 PM

Quote:

Originally posted by SCOTI
I'll be there if I can get my 74 to start. . . . ....

It will start. Just use your remote

SCOTI · 04-20-2004, 01:15 AM

Well.... I've been sick since working on a buddies car Fri night. So as of this moment, the column is partially removed & there's no ignition switch

.

If I can get out of work early enough tomorrow I'll try & get everything back together. I was going to take it by my old buddy MattA since he's become quite the master w/columns but the timing hasn't worked out (& then I got sick). I really dislike using the remote.....

I'm supposed to get Stoked Outs 55's new motor dialed in on Wed (& follow-up on Fri) w/Roger so time is running out. Oh, my significant other is out of town as well so I've been assigned child supervisor status so you know how it can be. Look foward to seeing you though.

Have reservations been made for dinner yet????

**N2TRUX** · 04-20-2004, 08:59 AM

Quote:

Originally posted by SCOTI
....Have reservations been made for dinner yet????

Reservations? We don't need no stinkin reserevations! :p

Not yet, but you know I'm for it. My wife and daughter won't be along on this trip. Marissa has a volleyball tournament to play in on Saturday so they can't come.

Don't worry though you can ride with me if I'm not full already. We have enough cars/trucks going that you won't be stuck out.

MattA · 04-20-2004, 02:21 PM

I'm going to try to go sat. as well. ScotI give me a call.

matt

04-08-2004, 09:30 AM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Who's going to Dust Off? There is a thread started in the Borad Meets forum about the Dust Off show. Anyone going? Look here for details __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-08-2004, 09:51 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I am planning to go out there to see ya'll and your truck in person, Ken. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-08-2004, 11:01 AM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i've got to many tests before and after that weekend to make it __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-08-2004, 01:16 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	I'll prob drag my turd out there Saturday & will prob do SC on Sunday as well. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-08-2004, 01:28 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I will just go out to look on Saturday. I don't have much that is really interesting right now. How big is the dust off usually? __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-08-2004, 03:42 PM	#7
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i'll be there . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-08-2004, 03:48 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Couple hundred vehicles (+ or -). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-08-2004, 08:34 PM	#9
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	We'll be there again this year but earlier so we can have a better spot.

04-09-2004, 09:47 AM	#11
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Going over there gives me a good excuse to get out of the house. I figured if it wasn't huge, I will probably bring my dog, too. She is getting old, so too much walking, and I end up carrying her. Ken, I still have your cell number. I will try to call on Saturday. I figure it would be just as easy to follow the crowd, I am sure there will be one around your truck! __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-19-2004, 12:53 PM	#13
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	It's this weekend guys. Who's still in?

04-19-2004, 02:14 PM	#14
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I am still in. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-19-2004, 02:47 PM	#15
twoodson Registered User Join Date: Jul 2003 Location: Lancaster, TX Posts: 291	Jon I am going to get by the body shop this week to meet you for sure. I may try and make the show as well but it will be after 12pm because I am the head coach of my 6yr old son's flag football team (DeSoto Wildcats) this year and they are having a car wash on Saturday but I only have to be there half a day. I checked their site and it looks pretty nice. I know Ken will have a crowd as well as Jason Hill.. I call you Jon before I come buy. Too much going on this weekend: Super Chevy, XposedVision Dust Off, & Car Washes...

04-19-2004, 04:41 PM	#16
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i'll be there with my blazer and truck __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-19-2004, 06:35 PM	#18
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	I'll be there if I can get my 74 to start. . . . .... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-20-2004, 01:15 AM	#20
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Well.... I've been sick since working on a buddies car Fri night. So as of this moment, the column is partially removed & there's no ignition switch . If I can get out of work early enough tomorrow I'll try & get everything back together. I was going to take it by my old buddy MattA since he's become quite the master w/columns but the timing hasn't worked out (& then I got sick). I really dislike using the remote..... I'm supposed to get Stoked Outs 55's new motor dialed in on Wed (& follow-up on Fri) w/Roger so time is running out. Oh, my significant other is out of town as well so I've been assigned child supervisor status so you know how it can be. Look foward to seeing you though. Have reservations been made for dinner yet???? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

04-20-2004, 02:21 PM	#22
MattA Registered User Join Date: Jul 2003 Location: Plano Posts: 83	I'm going to try to go sat. as well. ScotI give me a call. matt

Register or Log In To remove these advertisements.