CO Restored 1967 Gauge Cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Curtb1971** · 11-10-2017, 06:00 PM

After a few inquires I restored a few gauge cluster's so... Up for sale is a one year only 1967 gauge cluster. This cluster has very nice gauges and has been gone through 100%. All oem parts were used in this restoration besides some stainless hardware and lamps. The bezel is unique to 67' because it says "wipers" instead of "wiper/washer" 68'+
Work included
-gauge faces tediously cleaned, moving parts oiled, needles painted and terminal posts cleaned up
-lens polished
-all tins bead blasted and painted
-circuit board cleaned up and termination's installed with dielectric grease
-oem hardware chemically cleaned/painted
-new stainless terminal post hardware
-67' choke bezel, sanded and painted to factory colors (one screw hole crack was repaired with epoxy)
-speedo set to 6.7 miles
-60lbs oil gauge

This cluster is nothing fancy but is extremely nice and has a ton of time detailing.
$325 shipped/insured conus in foam lined boxSOLD

**Curtb1971** · 11-10-2017, 06:07 PM

Pics

**Curtb1971** · 11-10-2017, 06:12 PM

Pics 2

**Rods** · 11-10-2017, 07:25 PM

Very nice work. I'm interested can you post close up of repaired area and have you tested after restoration was completed ?

**Curtb1971** · 11-10-2017, 08:31 PM

Hey Rods,
Small screw crack was v out in the front and filled with epoxy. I beefed up the backside with epoxy as well. I'm pretty confident in the repair holding up.
Speedo was tested by spinning with a drill, dash lights/turn indicators work. As far as the other gauges, I'm in the process of setting up a bench test system to insure the gauges work as they should. The only thing I can't test without a truck is the amp gauge so that would be an unknown. The only pics i have on my phone are during the repair and backside after. I'll be back out to the shop tomorrow to get better pics. Thanks for the compliment

, Curt

**TBONE1964** · 11-10-2017, 09:48 PM

That is some very nice work Curt. Its amazing how nice these clusters clean up, especially when you have nice gauges to start with.

Good luck with your sale. Should sell quick to the right person.

Tom

**Curtb1971** · 11-10-2017, 10:16 PM

Quote:

Originally Posted by TBONE1964

That is some very nice work Curt. Its amazing how nice these clusters clean up, especially when you have nice gauges to start with.

Good luck with your sale. Should sell quick to the right person.

Tom

Thanks Tom!

Coming from the cluster king! Yeah, got to love starting with nice gauges to begin with, makes the process a lot smoother.

**Curtb1971** · 11-13-2017, 02:20 AM

Alright, finished my cluster controller and all the gauges tested out fine. Here is a pic of the outside of the repair as well.

54Caddy · 11-13-2017, 02:44 AM

Nice I like your mileage at 67 haha

**Curtb1971** · 11-13-2017, 02:57 AM

Quote:

Originally Posted by 54Caddy

Nice I like your mileage at 67 haha

Thanks man

**Rods** · 11-13-2017, 10:47 AM

I will take it......

**Curtb1971** · 11-13-2017, 11:19 AM

Quote:

Originally Posted by Rods

I will take it......

Rods, pm with PayPal info sent. Thanks

**GAc10boy** · 11-13-2017, 11:37 AM

Very nice restoration job! I love seeing these gauges lit up at night.

**Dustmaker65** · 11-13-2017, 11:39 AM

I don't even own a '67 and I want it! Very nice!!!

**Curtb1971** · 11-13-2017, 12:16 PM

Thanks guys

They do look awesome lit up at night, problem is walking to and from the shop light switch in the dark

Sounded like Homer Simpson walking trough some rose bushes last night (Doh!)

Quote:

Originally Posted by Dustmaker65

I don't even own a '67 and I want it! Very nice!!!

Don't tempt me to build another

**Rods** · 11-18-2017, 09:38 PM

Curt,
I recieved the cluster today. It's even nicer in person. Very nice workmanship.

**Curtb1971** · 11-18-2017, 10:15 PM

Quote:

Originally Posted by Rods

Curt,
I recieved the cluster today. It's even nicer in person. Very nice workmanship.

Good to hear Rod! Thanks man and when you get it installed shoot me a pic

11-10-2017, 06:00 PM	#1
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Restored 1967 Gauge Cluster After a few inquires I restored a few gauge cluster's so... Up for sale is a one year only 1967 gauge cluster. This cluster has very nice gauges and has been gone through 100%. All oem parts were used in this restoration besides some stainless hardware and lamps. The bezel is unique to 67' because it says "wipers" instead of "wiper/washer" 68'+ Work included -gauge faces tediously cleaned, moving parts oiled, needles painted and terminal posts cleaned up -lens polished -all tins bead blasted and painted -circuit board cleaned up and termination's installed with dielectric grease -oem hardware chemically cleaned/painted -new stainless terminal post hardware -67' choke bezel, sanded and painted to factory colors (one screw hole crack was repaired with epoxy) -speedo set to 6.7 miles -60lbs oil gauge This cluster is nothing fancy but is extremely nice and has a ton of time detailing. $325 shipped/insured conus in foam lined boxSOLD Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com Last edited by Curtb1971; 11-16-2017 at 10:11 AM. Reason: Sold

11-10-2017, 06:07 PM	#2
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Restored 1967 Gauge Cluster Pics Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

11-10-2017, 06:12 PM	#3
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Restored 1967 Gauge Cluster Pics 2 Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

11-10-2017, 07:25 PM	#4
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Restored 1967 Gauge Cluster Very nice work. I'm interested can you post close up of repaired area and have you tested after restoration was completed ?

11-10-2017, 08:31 PM	#5
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Restored 1967 Gauge Cluster Hey Rods, Small screw crack was v out in the front and filled with epoxy. I beefed up the backside with epoxy as well. I'm pretty confident in the repair holding up. Speedo was tested by spinning with a drill, dash lights/turn indicators work. As far as the other gauges, I'm in the process of setting up a bench test system to insure the gauges work as they should. The only thing I can't test without a truck is the amp gauge so that would be an unknown. The only pics i have on my phone are during the repair and backside after. I'll be back out to the shop tomorrow to get better pics. Thanks for the compliment, Curt Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com Last edited by Curtb1971; 11-10-2017 at 08:33 PM. Reason: Spelling

11-10-2017, 09:48 PM	#6
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Restored 1967 Gauge Cluster That is some very nice work Curt. Its amazing how nice these clusters clean up, especially when you have nice gauges to start with. Good luck with your sale. Should sell quick to the right person. Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-13-2017, 02:20 AM	#8
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Restored 1967 Gauge Cluster Alright, finished my cluster controller and all the gauges tested out fine. Here is a pic of the outside of the repair as well. Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com Last edited by Curtb1971; 11-13-2017 at 02:21 AM. Reason: Spelling

11-13-2017, 02:44 AM	#9
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Restored 1967 Gauge Cluster Nice I like your mileage at 67 haha __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

11-13-2017, 10:47 AM	#11
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Restored 1967 Gauge Cluster I will take it......

11-13-2017, 11:37 AM	#13
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: Restored 1967 Gauge Cluster Very nice restoration job! I love seeing these gauges lit up at night. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

11-13-2017, 11:39 AM	#14
Dustmaker65 Senior Member Join Date: Jan 2015 Location: Marquette Heights, IL. Posts: 1,135	Re: Restored 1967 Gauge Cluster I don't even own a '67 and I want it! Very nice!!! __________________ Jimmy Hoelzel

11-18-2017, 09:38 PM	#16
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: Restored 1967 Gauge Cluster Curt, I recieved the cluster today. It's even nicer in person. Very nice workmanship.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.