Turn Signal Cancel Cam......Does Anybody Know? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

saxart · 11-23-2017, 09:54 AM

The horn pin and spring assembly on my '70's (non-tilt) canceling cam was missing so I ordered this one from Speedway.

https://www.speedwaymotors.com/Class...hoCMu4QAvD_BwE

What showed up was not the style pictured on their site, but the slightly newer "push and twist" style with the small tab on the side of the plastic bushing. It won't fit in my old canceling cam, and I'm not about to jerry-rig it by gluing it in.

Since I can't seem to find anyone who sells the older style "jam it in" style, I figured I'd just get a new canceling cam and be done with it. Does anybody know if the cams sold through Brothers Trucks or Classic Parts are the "push and twist" style with regards to this pin and bushing? Both websites show them in a photo, but from the backside, so you can't see the end where this pin/bushing set up goes.

Thanks much!

Andy4639 · 11-23-2017, 11:37 AM

Is this what you are looking for?

http://restorationpartssource.com/st..._moreinfo.html

saxart · 11-23-2017, 11:19 PM

Quote:

Originally Posted by Andy4639

Is this what you are looking for?

Sorry, maybe I should have been more clear. I'm looking for one of these:

https://www.classicparts.com/1967-72...ctinfo/27-241/

I just don't know what the other side looks like where the pin fits.

*randy500* · 11-24-2017, 12:30 AM

do you need the whole assembly or just the
pin, spring and retainer?

*randy500* · 11-24-2017, 12:32 AM

I looked at the part you posted and I couldn't imagine one of those being sold without the pin, spring and retainer.

*randy500* · 11-24-2017, 12:35 AM

I correct myself, I did a search and it seems many don't come complete.
I probably have tons of those...I can go look, you can have one for the cost of shipping.

saxart · 11-24-2017, 12:51 AM

Quote:

Originally Posted by randy500

I correct myself, I did a search and it seems many don't come complete.
I probably have tons of those...I can go look, you can have one for the cost of shipping.

Well wouldn't THAT be a Thanksgiving Treat to remember! Thanks Randy. Keep me posted.

(Reason number 8,325 to love this place!)

*randy500* · 11-24-2017, 12:52 AM

Agreed, its a great place, I will go out and look right now.

*randy500* · 11-24-2017, 01:13 AM

I have one for you, it fits in a small flat rate box, so send $7 via PayPal and I will ship it tomorrow if the UPS store is open. Send it per the forum rules for goods and services which makes it a breeze to print a label. My PayPal link is in my signature line, put a note in there of what you paying for and make sure your address is correct.

Happy Thanksgiving.

saxart · 11-24-2017, 01:21 AM

Thanks so much Randy. I just sent you some dough. Thanks for making this a great place!

*randy500* · 11-24-2017, 01:25 AM

Quote:

Originally Posted by saxart

Thanks so much Randy. I just sent you some dough. Thanks for making this a great place!

Your welcome and I do see the funds. I will post tracking in PayPal.

franken · 11-24-2017, 04:08 PM

Auto parts stores around here have a help section with cancel cams.

saxart · 11-27-2017, 11:54 PM

Showed up today Randy. Thanks again, my truck will have a steering wheel again after being off for almost a year. You rock!!!

*randy500* · 11-28-2017, 01:25 AM

Quote:

Originally Posted by saxart

Showed up today Randy. Thanks again, my truck will have a steering wheel again after being off for almost a year. You rock!!!

Your welcome buddy, enjoy!

11-23-2017, 09:54 AM	#1
saxart Registered User Join Date: Aug 2012 Location: St. Croix River Valley, WI Posts: 795	Turn Signal Cancel Cam......Does Anybody Know? The horn pin and spring assembly on my '70's (non-tilt) canceling cam was missing so I ordered this one from Speedway. https://www.speedwaymotors.com/Class...hoCMu4QAvD_BwE What showed up was not the style pictured on their site, but the slightly newer "push and twist" style with the small tab on the side of the plastic bushing. It won't fit in my old canceling cam, and I'm not about to jerry-rig it by gluing it in. Since I can't seem to find anyone who sells the older style "jam it in" style, I figured I'd just get a new canceling cam and be done with it. Does anybody know if the cams sold through Brothers Trucks or Classic Parts are the "push and twist" style with regards to this pin and bushing? Both websites show them in a photo, but from the backside, so you can't see the end where this pin/bushing set up goes. Thanks much! __________________ Meet "Old Roy": http://67-72chevytrucks.com/vboard/s...d.php?t=707801

11-23-2017, 11:37 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Turn Signal Cancel Cam......Does Anybody Know? Is this what you are looking for? http://restorationpartssource.com/st..._moreinfo.html __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-24-2017, 12:30 AM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Turn Signal Cancel Cam......Does Anybody Know? do you need the whole assembly or just the pin, spring and retainer?

11-24-2017, 12:32 AM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Turn Signal Cancel Cam......Does Anybody Know? I looked at the part you posted and I couldn't imagine one of those being sold without the pin, spring and retainer.

11-24-2017, 12:35 AM	#6
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Turn Signal Cancel Cam......Does Anybody Know? I correct myself, I did a search and it seems many don't come complete. I probably have tons of those...I can go look, you can have one for the cost of shipping.

11-24-2017, 12:52 AM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Turn Signal Cancel Cam......Does Anybody Know? Agreed, its a great place, I will go out and look right now.

11-24-2017, 01:13 AM	#9
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Turn Signal Cancel Cam......Does Anybody Know? I have one for you, it fits in a small flat rate box, so send $7 via PayPal and I will ship it tomorrow if the UPS store is open. Send it per the forum rules for goods and services which makes it a breeze to print a label. My PayPal link is in my signature line, put a note in there of what you paying for and make sure your address is correct. Happy Thanksgiving.

11-24-2017, 01:21 AM	#10
saxart Registered User Join Date: Aug 2012 Location: St. Croix River Valley, WI Posts: 795	Re: Turn Signal Cancel Cam......Does Anybody Know? Thanks so much Randy. I just sent you some dough. Thanks for making this a great place! __________________ Meet "Old Roy": http://67-72chevytrucks.com/vboard/s...d.php?t=707801

11-24-2017, 04:08 PM	#12
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,150	Re: Turn Signal Cancel Cam......Does Anybody Know? Auto parts stores around here have a help section with cancel cams.

11-27-2017, 11:54 PM	#13
saxart Registered User Join Date: Aug 2012 Location: St. Croix River Valley, WI Posts: 795	Re: Turn Signal Cancel Cam......Does Anybody Know? Showed up today Randy. Thanks again, my truck will have a steering wheel again after being off for almost a year. You rock!!! __________________ Meet "Old Roy": http://67-72chevytrucks.com/vboard/s...d.php?t=707801



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.